DES PLAINES, IL —
OSHA Inspection: BENITO TORREZ DBA TORREZ CONSTRUCTION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of BENITO TORREZ DBA TORREZ CONSTRUCTION in 34 N. WARRINGTON STREET, DES PLAINES, IL 60016 (NAICS 238130). OSHA activity number 342047339.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BENITO TORREZ DBA TORREZ CONSTRUCTION
- Site address
- 34 N. WARRINGTON STREET
- City
- DES PLAINES
- State
- IL
- ZIP
- 60016
- Mailing
- 119 WALLACE COURT, CHICAGO HEIGHTS, IL 60411
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 2
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.501 B13
- Issued
- Mar 9, 2017
- Penalty
- Initial $3,803 · Current $1,940 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501(b): a) On or about January 24, 2017, employees were exposed to the hazard of falling approximately 19 feet from the top of a wall to the exterior of the building while performing carpentry work. b) On or about January 24, 2017, employees were exposed to the hazard of falling approximately 12 feet from second level window/wall openings to the exterior of the building while performing carpentry work. No abatement certification or documentation required for this violation.
Recent events (2)
- — I (S) $1940
- — Z (S) $3803
1926.1052 C01 II
- Issued
- Mar 9, 2017
- Penalty
- Initial $3,259 · Current $1,660 Reduced
General-duty citation text
29 CFR 1926.1052(c)(1)(ii): Stairways having four or more risers or rising more than 30 inches (76 cm), whichever is less, were not equipped with a stairrail system along each unprotected side or edge: a) On or about January 24, 2017, employees were exposed to fall hazards of up to approximately 12 feet where a stairway between the first and second level of the building was not equipped with a stairrail system along its unprotected side or edge. No abatement certification or documentation required for this violation.
Recent events (2)
- — I (S) $1660
- — Z (S) $3259
1926.404 B01 II
- Issued
- Mar 9, 2017
- Abate by
- Mar 15, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.404(b)(1)(ii): On a construction site, where an assured equipment grounding program was not utilized, all 120-volt, single-phase, 15 and 20 ampere receptacle outlets which were not a part of the permanent wiring of the building or structure and which are in use by employees did not have approved ground fault circuit interrupters for personal protection: a) On or about January 24, 2017, employees were provided with electrical tools and equipment connected by cord and plug to a Yamaha 2600 watt portable generator without the use of ground fault circuit interrupters or an assured equipment grounding conductor program. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (O) $0
- — Z (O) $0
1926.416 E01
- Issued
- Mar 9, 2017
- Abate by
- Mar 15, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used: a) On or about January 24, 2017, worn and frayed electrical cords were used to supply electricity to tools and equipment at the site. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (O) $0
- — Z (O) $0
1926.503 B01
- Issued
- Mar 9, 2017
- Abate by
- Apr 4, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(b)(1): The employer did not verify fall protection training by preparing a written certification record: a) On or about January 24, 2017, the employer did not prepare written certification records related to employee fall protection training. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 238130)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342047339.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.