PRATTVILLE, AL —
OSHA Inspection: SUPERVOID SYSTEMS, LLC
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of SUPERVOID SYSTEMS, LLC in 1172 CR 24, PRATTVILLE, AL 36067 (NAICS 332999). OSHA activity number 342048311.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SUPERVOID SYSTEMS, LLC
- Site address
- 1172 CR 24
- City
- PRATTVILLE
- State
- AL
- ZIP
- 36067
- Mailing
- 1172 CR 24, PRATTVILLE, AL 36067
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 10
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.178 L01 II
- Issued
- Mar 24, 2017
- Abate by
- Apr 3, 2017
- Penalty
- Initial $1,630 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(ii): The employer did not ensure that each operator had successfully completed the training consisting of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace. a)Yard area: On or about January 24, 2017 and times prior to employee(s) are exposed to hazards associated with the operation of powered industrial trucks such as struck by and tip or roll over and hazards that could occur from not having a comprehensive training program that includes formal lecture, written material or video as part of the training process.
Recent events (2)
- — I (S) $0
- — Z (S) $1630
1910.178 Q07
- Issued
- Mar 24, 2017
- Abate by
- Apr 3, 2017
- Penalty
- Initial $1,630 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service: a)Yard area: On or about January 24, 2017 and times prior to employee(s) are exposed to hazards associated with the operation of powered industrial trucks such as struck by and tip or roll over hazards that could occur from not ensuring the forklift is in safe operating condition by conducting a daily examination.
Recent events (2)
- — I (S) $1500
- — Z (S) $1630
1910.1200 E01
- Issued
- Mar 24, 2017
- Abate by
- May 12, 2017
- Penalty
- Initial $2,173 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: a)Entire Facility: On or about January 24, 2017, and prior to, no written hazard communication program was available to employee(s) exposed to hazards including but not limited to: Mild Carbon steel fume from plasma cutter, propane and lubricants for pneumatic tools.
Recent events (2)
- — I (S) $1500
- — Z (S) $2173
1910.132 D02
- Issued
- Mar 24, 2017
- Abate by
- Apr 3, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated, the person certifying that the evaluation has been performed, the date(s) of the hazard assessment, and, which identifies the document as a certification of hazard assessment: Entire facility: On or about January 24, 2017, and prior to, employee(s) were not provided a hazard assessment for job tasks that exposed employee(s) to struck-by hazards while performing pneumatic tool usage with staples/c-crimps, maintenance welding/torching job tasks and for job tasks that require use cutting carbon steel with a plasma cutter.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.141 D02 II
- Issued
- Mar 24, 2017
- Abate by
- Apr 5, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.141(d)(2)(ii): Lavatories were not provided with hot and cold, or tepid running water: a) Entire facility: On or about January 24, 2017 and at times prior, the employer exposed employees to unsafe biological health hazard conditions in that the employer did not have any type of running water for employees to wash their hands and no fixed toilet on site.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.141 G02
- Issued
- Mar 24, 2017
- Abate by
- Apr 5, 2017
- Penalty
- Initial $0 · Current $0
F104
General-duty citation text
29 CFR 1910.141(g)(2): Employees were permitted to consume food or beverage in area(s) exposed to toxic materials: a) Lunch/workstation table in shop: On or about January 25, 2017 and at times prior, the employer exposed employees to heavy metal(s) ingestion by not prohibiting the consumption of food and beverages by employees in the work area. A wipe sample of lunch/break table resulted in the following levels of heavy metal(s): Iron Oxide at 998.72 micrograms.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Supervoid Systems, LLC
View Supervoid Systems, LLC's full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342048311.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.