VANDALIA, MO —
OSHA Inspection: HARBISON WALKER INTERNATIONAL INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of HARBISON WALKER INTERNATIONAL INC. in 1000 BOOKER STREET, VANDALIA, MO 63382 (NAICS 327121). OSHA activity number 342052024.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HARBISON WALKER INTERNATIONAL INC.
- Site address
- 1000 BOOKER STREET
- City
- VANDALIA
- State
- MO
- ZIP
- 63382
- Mailing
- 1000 BOOKER STREET, VANDALIA, MO 63382
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327121
- Employees
- 150
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.22 A02
- Issued
- Feb 8, 2017
- Abate by
- Mar 28, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(a)(2): The floor of every workroom was not maintained in a clean and, so far as possible, a dry condition. Where wet processes were used, drainage was not maintained, and false floors, platforms, mats, or other dry standing places should be provided where practicable: At 1000 Booker Street, Vandalia, MO 63382, specifically inside of the Press Room Basement, standing water existed on the walkway on or about 01/25/17.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.147 C04 II
- Issued
- Feb 8, 2017
- Abate by
- Mar 28, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(ii): The energy control procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, Items A-D of this section: At 1000 Booker Street, Vandalia, MO 63383, specifically inside of the Press Room, on or about 01/25/17, the specific lockout/tagout procedure for the Sacmi Hydraulic Press, m/n PHR1600, did not identify the magnitude of the electrical and hydraulic energy sources. At 1000 Booker Street, Vandalia, MO 63383, specifically inside of the Press Room, on or about 01/25/17, the specific lockout/tagout procedure for the Boyd Mechanical Punch Presses two through six did not identify the magnitude of the electrical and pneumatic energy sources.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.217 D06 I
- Issued
- Feb 8, 2017
- Abate by
- Mar 28, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.217(d)(6)(i): Tonnage and stroke requirements were neither stamped on the die(s) nor recorded on records readily available to the die-setter: At 1000 Booker Street, Vandalia, MO 63383, specifically east of the Press Room, on or about 01/25/17, approximately 100 dies used in the Boyd Mechanical Punch Presses #2 through #6 were not stamped with the tonnage and stroke requirements. This information was not recorded elsewhere for the die-setters.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.217 D06 II
- Issued
- Feb 8, 2017
- Abate by
- Mar 28, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.217(d)(6)(ii): Die(s) were not stamped to indicate the upper die weight when necessary for air counterbalance pressure adjustment: At 1000 Booker Street, Vandalia, MO 63383, specifically east of the Press Room, on or about 01/25/17, approximately 100 dies used in the Boyd Mechanical Punch Presses #2 through #6 were not stamped with the upper die weight. This information was not recorded elsewhere for the die-setters.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.217 D06 III
- Issued
- Feb 8, 2017
- Abate by
- Mar 28, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.217(d)(6)(iii): Die(s) were not stamped to indicate complete die weight where handling equipment could become overloaded: At 1000 Booker Street, Vandalia, MO 63383, specifically east of the Press Room, on or about 01/25/17, approximately 100 dies used in the Boyd Mechanical Punch Presses #2 through #6 were not stamped to indicate the complete die weight. This information was not recorded elsewhere for the die-setters.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Harbison Walker International INC.
View Harbison Walker International INC.'s full OSHA safety record →
More inspections in this industry (NAICS 327121)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342052024.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.