Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ALL STATES AG PARTS INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of ALL STATES AG PARTS INC. in W5764 COUNTY ROAD A., BLACK CREEK, WI 54106 (NAICS 423820). OSHA activity number 342062296.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch ALL States AG Parts INC. — free Get an email when a new federal OSHA severe-injury report for ALL States AG Parts INC. is published. One employer, no account, unsubscribe in one click.
Site address
W5764 COUNTY ROAD A.
City
BLACK CREEK
State
WI
ZIP
54106
Mailing
W5764 COUNTY ROAD A., BLACK CREEK, WI 54106
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423820
Employees
23
Ownership type
A

5 citations on file for this inspection.

1910.184 I01

Serious Gravity 5 1 instance 3 exposed
Issued
Jun 8, 2017
Penalty
Initial $5,887 · Current $4,121 Reduced
29 CFR 1910.184(i)(1): Synthetic web slings:  Sling Identification.  Each sling shall be marked or coded to show the rated capacities for each type of hitch and type of synthetic web material:  On our about  January 21, 2017, employees were exposed to the hazard of being crushed by loads due to the fact that employees were using synthetic web slings that were not marked with legible identification markings, to include their rated capacities.
Recent events (2)
  • — I (S) $4120.9
  • — Z (S) $5887

1910.303 B02

Serious Gravity 5 5 instances 1 exposed
Issued
Jun 8, 2017
Penalty
Initial $6,926 · Current $4,848 Reduced
29 CFR 1910.303(b)(2):  Listed or labeled equipment shall be installed and used in accordance with any instructions included in the listing or labeling:  On or about January 27, 2017, employees were exposed to electric shock and fire hazards when using a Relocatable Power Tap (outlet strip) to power two block heaters on equipment in the yard.  The Relocatalble Power Tap (RPT) was daisy chained to an extension cord that supplied power to the RPT from a receptacle inside the "old machine shop".  The RPT was permanently secured to a post out in the yard.     Underwriters Laboratories Inc. listing requirements for RPTs state the following: "RPTs are intended to be directly connected to a permanently installed branch circuit receptacle.  RPTs are not intended to be series connected (daisy chained) to other relocatable power taps or to extension cords.  RPTs are not intended to be permanently secured to building structures, tables, work benches or similar structures, nor are they intended to be used as a substitute for fixed wiring.
Recent events (2)
  • — I (S) $4848.2
  • — Z (S) $6926

1910.305 G01 IV B

Serious Gravity 5 2 instances 1 exposed
Issued
Jun 8, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.305(g)(1)(iv)(B): Unless specifically permitted otherwise in paragraph (g)(1)(ii) of this section, flexible cords and cables may not be used to run through holes in walls, ceilings, or floors.  On or about January 27, 2017, employees were exposed to electric shock and fire hazards due to the fact that extension (flexible) cords were routed through a hole in the wall of the "old machine shop" to power block heaters on equipment in the yard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.305 G02 III

Serious Gravity 5 1 instance 1 exposed
Issued
Jun 8, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws:  On or about January 27, 2017, employees were exposed to electrical shock hazards due to the fact that a flexible cord, with inadequate strain relief, was being used to power a block heater on a piece of equipment in the yard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 F06 II

Other-than-serious 3 instances 3 exposed
Issued
Jun 8, 2017
Abate by
Jul 5, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(f)(6)(ii): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals and which, in conjunction with the other information immediately available to employees under the hazard communication program, would provide employees with the specific information regarding the physical and health hazards of the hazardous chemical.  On or about January 17, 2017, employees working in the washbay and old machine shop, were exposed to hazardous chemicals, including oil, antifreeze, and Ag Master hydraulic tractor fluid and the containers were not marked with general information regarding the hazards of the chemicals.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342062296.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.