CLINTON, CT —
OSHA Inspection: NATIONAL SINTERED ALLOYS INCORPORATED
Follow-up inspection · Safety discipline
At a glance
On , OSHA opened a follow-up safety inspection of NATIONAL SINTERED ALLOYS INCORPORATED in P.O. BOX 332 5 HERITAGE PARK, CLINTON, CT 06413 (NAICS 332999). OSHA activity number 342066057.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NATIONAL SINTERED ALLOYS INCORPORATED
- Site address
- P.O. BOX 332 5 HERITAGE PARK
- City
- CLINTON
- State
- CT
- ZIP
- 06413
- Mailing
- P.O. BOX 332 5 HERITAGE PARK, CLINTON, CT 06413
What kind of inspection was it?
- Inspection type
- Follow-up (F)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 65
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.147 C04 II
- Issued
- Jun 21, 2017
- Abate by
- Oct 1, 2017
- Penalty
- Initial $34,858 · Current $27,800 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii): Procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, 29 CFR 1910.147(c)(4)(ii)(A), (c)(4)(ii)(B), (c)(4)(ii)(C) and (c)(4)(ii)(D): Location: 5 Heritage Park, Route 145, Clinton, CT 06413 Specific energy control procedures were not developed and implemented to outline the scope, purpose, authorization, rules and techniques to be utilized for controlling hazardous energy with regards to the mechanical power presses and tumbling machines. National Sintered Alloys Incorporated was previously cited for a violation of this occupational safety and health standard or its equivalent standard, 29 CFR 1910.147(c)(4)(i), which was contained in OSHA inspection number 809622, citation number 01, item number 002a and was affirmed as a final order on February 13, 2013, with respect to a workplace located at 5 Heritage Park, Clinton, CT. National Sintered Alloys Incorporated was previously cited for a violation of this occupational safety and health standard or its equivalent standard, 29 CFR 1910.147(c)(4)(ii), which was contained in OSHA inspection number 1080876, citation number 2, item number 1a and was affirmed as a final order on October 28, 2015 with respect to a workplace located at 5 Heritage Park, Clinton, CT.
Recent events (2)
- — I (R) $27800
- — Z (R) $34858
1910.147 C07 I A
- Issued
- Jun 21, 2017
- Abate by
- Oct 1, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation. Facility: Each authorized employee performing lockout/tagout while performing maintenance and servicing on equipment such as but not limited to mechanical power presses and tumbling machines were not provided with energy control training that included the recognition of applicable hazardous energy sources, the type and magnitude of the energy available and the methods and means necessary for energy isolation. National Sintered Alloys Incorporated was previously cited for a violation of this occupational safety and health standard or its equivalent standard, 29 CFR 1910.147(c)(7)(i), which was contained in OSHA inspection number 809622, citation number 01, item number 002b and was affirmed as a final order on February 13, 2013, with respect to a workplace located at 5 Heritage Park, Clinton, CT. National Sintered Alloys Incorporated was previously cited for a violation of this occupational safety and health standard or its equivalent standard, 29 CFR 1910.147(c)(7)(i)(A), which was contained in OSHA inspection number 1080876, citation number 2, item number 1b and was affirmed as a final order on October 28, 2015 with respect to a workplace located at 5 Heritage Park, Clinton, CT.
Recent events (2)
- — I (R) $0
- — Z (R) $0
1910.147 C06 I
- Issued
- Jun 21, 2017
- Abate by
- Oct 1, 2017
- Penalty
- Initial $11,154 · Current $9,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: Facility: A periodic inspection of the energy control program/procedures was not conducted at least annually to ensure the procedure and the requirements of the 29 CFR 1910.147 standard were being followed. National Sintered Alloys Incorporated was previously cited for a violation of this occupational safety and health standard or its equivalent standard, 29 CFR 1910.147(c)(6)(i), which was contained in OSHA inspection number 1080876, citation number 1, item number 1 and was affirmed as a final order on October 28, 2015 with respect to a workplace located at 5 Heritage Park, Clinton, CT.
Recent events (2)
- — I (R) $9000
- — Z (R) $11154
More inspections at National Sintered Alloys Incorporated
View National Sintered Alloys Incorporated's full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342066057.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.