ALEXANDER CITY, AL ·
OSHA Inspection: C&J TECH ALABAMA, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of C&J TECH ALABAMA, INC. in 145 PLANT 10 DRIVE, ALEXANDER CITY, AL 35010 (NAICS 325211). OSHA activity number 342075777.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- C&J TECH ALABAMA, INC.
- Site address
- 145 PLANT 10 DRIVE
- City
- ALEXANDER CITY
- State
- AL
- ZIP
- 35010
- Mailing
- 145 PLANT 10 DRIVE, ALEXANDER CITY, AL 35010
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 325211
- Employees
- 293
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1910.147 C04 I
- Issued
- May 23, 2017
- Penalty
- Initial $9,054 · Current $6,400 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) Machine 17; On or about February 2, 2017 and at times prior thereto the employer exposed employees to potential hazardous energies in that employees were allowed to work on the injection molding machine without locking it out in accordance with the established procedures.
Recent events (2)
- · I (S) $6400
- · Z (S) $9054
1910.147 C05 I
- Issued
- May 23, 2017
- Penalty
- Initial $7,696 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(5)(i): Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing or blocking of machines or equipment from energy sources: a) Machine 17; On or about February 2, 2017 and at times prior thereto the employer exposed employees to potential hazardous energies in that the employer had not provided authorized employees locks for isolating and securing machine energy sources.
Recent events (2)
- · I (S) $0
- · Z (S) $7696
1910.147 C07 I
- Issued
- May 23, 2017
- Penalty
- Initial $9,054 · Current $6,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program was understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls were acquired by employees. a) Machine 17; On or about February 2, 2017 and at times prior thereto the employer exposed employees to potential hazardous energies in that employees were allowed to work on equipment without first being trained to ensure those employees had the knowledge and skills for the safe application, usage, and removal of energy controls.
Recent events (2)
- · I (S) $6000
- · Z (S) $9054
1910.147 F03 II D
- Issued
- May 23, 2017
- Penalty
- Initial $9,054 · Current $6,000 Reduced
General-duty citation text
29 CFR 1910.147(f)(3)(ii)(D): Each authorized employee did not affix a personal lockout or tagout device to the group lockout device before working on the machine or equipment: a) Machine 17; On or about February 2, 2017 and at times prior thereto the employer exposed employees to potential hazardous energies in that employees were allowed to work on injection molding machine number 17 without all employees applying a personal lockout device on the energy control lockout point.
Recent events (2)
- · I (S) $6000
- · Z (S) $9054
More inspections in this industry (NAICS 325211)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 342075777.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.