IDAHO FALLS, ID —
OSHA Inspection: FRAZIER INDUSTRIAL COMPANY
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of FRAZIER INDUSTRIAL COMPANY in 2255 WEST 49TH STREET, IDAHO FALLS, ID 83405 (NAICS 337215). OSHA activity number 342075843.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FRAZIER INDUSTRIAL COMPANY
- Site address
- 2255 WEST 49TH STREET
- City
- IDAHO FALLS
- State
- ID
- ZIP
- 83405
- Mailing
- 2255 WEST 49TH STREET, IDAHO FALLS, ID 83401
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337215
- Employees
- 400
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.134 E01
- Issued
- Mar 8, 2017
- Abate by
- Apr 3, 2017
- Penalty
- Initial $4,617 · Current $2,309 Reduced
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: (a) Paint Dip Area: On or about February 2, 2017 and at times prior, employees were wearing 3M half mask respirators while dipping shelving material. Note: Abatement certification is required for this item.
Recent events (3)
- — F (S) $2308.5
- — C (S) $4617
- — Z (S) $4617
1910.134 F02
- Issued
- Mar 8, 2017
- Abate by
- Apr 3, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator: (a) Paint Dip Area: On or about February 2, 2017 and at times prior, employees were wearing 3M half mask respirators while dipping shelving material. Note: Abatement certification is required for this item.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.133 A01
- Issued
- Mar 8, 2017
- Abate by
- Apr 3, 2017
- Penalty
- Initial $7,696 · Current $3,848 Reduced
General-duty citation text
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation: (a) Fabrication Area: On or about February 2, 2017 and at times prior, employees were grinding Rails and Bips. Note: Abatement certification is required for this item.
Recent events (3)
- — F (S) $3848
- — C (S) $7696
- — Z (S) $7696
1910.252 A02 VII
- Issued
- Mar 8, 2017
- Abate by
- Apr 3, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.252(a)(2)(vii): Where practicable, combustible materials were not relocated at least 35 feet (10.7 m) from the cutting or welding operation work site: (a) Fabrication Area: On or about February 2, 2017 and at times prior, employees were welding Bips. Note: Abatement certification is required for this item.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.252 B02 III
- Issued
- Mar 8, 2017
- Abate by
- Apr 3, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.252(b)(2)(iii): Workers and other persons adjacent to the welding area were not protected from the rays by noncombustible or flameproof screens or shields: (a) Fabrication Area: On or about February 2, 2017 and at times prior, employees were welding Bips and Rails. Note: Abatement certification is required for this item.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.1200 H01
- Issued
- Mar 8, 2017
- Abate by
- Apr 3, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: (a) Paint Dip Area: On or about February 2, 2017 and at times prior, employees dip metal parts into tanks containing New Fast Dry Hi-Solids Dip Enamel. Note: Abatement certification is required for this item.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
More inspections at Frazier Industrial Company
View Frazier Industrial Company's full OSHA safety record →
More inspections in this industry (NAICS 337215)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342075843.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.