SOMERSET, PA —
OSHA Inspection: MOROCCO ELECTRIC INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of MOROCCO ELECTRIC INC. in 370 SOUTH PLEASANT AVENUE, SOMERSET, PA 15501 (NAICS 334419). OSHA activity number 342086634.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MOROCCO ELECTRIC INC.
- Site address
- 370 SOUTH PLEASANT AVENUE
- City
- SOMERSET
- State
- PA
- ZIP
- 15501
- Mailing
- 201 SOUTH PLEASANT AVENUE, SOMERSET, PA 15501
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 334419
- Employees
- 34
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Feb 15, 2017
- Penalty
- Initial $6,464 · Current $3,232 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Facility, 370 S. Pleasant Avenue, Somerset, PA: On or about February 3, 2017 there was no guard on the table saw used by employees to cut metal. The blade protruded above the table approximately 3 inches and no guards were in place to protect the employees from the rotating blade.
Recent events (3)
- — F (S) $3232
- — C (S) $6464
- — Z (S) $6464
1910.303 B02
- Issued
- Feb 15, 2017
- Penalty
- Initial $3,232 · Current $1,616 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: (a) Facility, 370 S. Pleasant Avenue, Somerset, PA: On or about February 3, 2017 the Powermatic drill press did not have a functioning power switch and the employer removed the flexible power cord and direct wired it into the panel box and used a breaker to turn the equipment on and off which is not in accordance with the listing or labeling.
Recent events (3)
- — F (S) $1616
- — C (S) $3232
- — Z (S) $3232
1910.305 B02 I
- Issued
- Feb 15, 2017
- Abate by
- Feb 22, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy: (a) Facility, 307 S. Pleasant Avenue, Somerset, PA: On or about February 3, 2017 an outlet box did not have a cover or faceplate in place.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.305 D02
- Issued
- Feb 15, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(d)(2): Panelboards were not mounted in cabinets, cutout boxes, or enclosures designed for the purpose and were not dead front:: (a) Facility, 370 S. Pleasant Avenue, Somerset, PA: On or about February 3, 2017 the panelboard mounted in the room where aluminum frames were being stored was open and did not have a dead front exposing employees to potential electrical shock hazards should they contact the live parts.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.178 L01 I
- Issued
- Feb 15, 2017
- Abate by
- Apr 4, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): (a) Facility, 307 S. Pleasant Avenue, Somerset, PA: On or about February 3, 2017 the employer did not ensure that each person who operates the powered industrial truck had successfully completed training and evaluation to operate safely.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
More inspections at Morocco Electric INC.
View Morocco Electric INC.'s full OSHA safety record →
More inspections in this industry (NAICS 334419)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342086634.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.