OSHA Inspection: KENNAN MILLWORKS LLC

Issued

2017-03-30 00:00:00

Abate by

2017-04-27 00:00:00

Penalty

Initial $3803.00 · Current $1902.00 Reduced

General-duty citation text

29 CFR 1910.213(a)(12): The bottom portion of the saw blade behind the table was not guarded against accidental contact:    (a) In the sawmill; The lower circular blade of the double circular mill (head saw) was not equipped with an adequate means of guarding to prevent a cut by hazard.

Issued

2017-03-30 00:00:00

Abate by

2017-04-27 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.265(e)(2)(iii)(c): Upper saw(s) of double circular mill(s) were not provided with substantial hood or guard:  (a) In the sawmill; The upper circular blade of the double circular mill (head saw) was not equipped with an adequate means of guarding to prevent a cut by hazard.

Issued

2017-03-30 00:00:00

Abate by

2017-04-27 00:00:00

Penalty

Initial $3259.00 · Current $1630.00 Reduced

General-duty citation text

29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):     (a) In the sawmill; The employer did not ensure that the belt and pulley on the gang saw was equipped with a guard to prevent entanglement.

Issued

2017-03-30 00:00:00

Abate by

2017-04-27 00:00:00

Penalty

Initial $3803.00 · Current $0.00 Reduced

General-duty citation text

29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven feet or less above floors or platforms were not enclosed:    (a) In the sawmill; The employer did not ensure that the chain and sprocket on the gang saw was equipped with a guard to prevent entanglement.