MIDDLETOWN, OH —
OSHA Inspection: WEISBROD MASONRY, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of WEISBROD MASONRY, INC. in 601 NORTH BREIEL BLVD., MIDDLETOWN, OH 45043 (NAICS 238140). OSHA activity number 342096872.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- WEISBROD MASONRY, INC.
- Site address
- 601 NORTH BREIEL BLVD.
- City
- MIDDLETOWN
- State
- OH
- ZIP
- 45043
- Mailing
- 308 BRADLEY AVENUE, CINCINNATI, OH 45215
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 95
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.451 A06
- Issued
- Apr 20, 2017
- Abate by
- May 9, 2017
- Penalty
- Initial $8,873 · Current $4,437 Reduced
General-duty citation text
29 CFR 1926.451(a)(6): Scaffolds shall be designed by a qualified person and shall be constructed and loaded in accordance with that design. On February 10, 2017, located on the North Wing of area D23, employees were exposed to fall hazards while performing masonry work from a tubular welded frame scaffold without the use of snap pins installed to support the adjustable saddle hanger to the frame of the scaffolding system per manufacture design. Potential fall height measured to be 23.6 feet. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
- — I (S) $4436.5
- — Z (S) $8873
1926.451 F03
- Issued
- Apr 20, 2017
- Penalty
- Initial $8,873 · Current $4,437 Reduced
General-duty citation text
29 CFR 1926.451(f)(3): Scaffolds and scaffold components shall be inspected for visible defects by a competent person before each work shift, and after any occurrence which could affect a scaffold's structural integrity. On February 10, 2017, located on the North Wing of area D23, employees were exposed to fall hazards while performing masonry work from a tubular welded frame scaffold that had not been inspected by a competent person for defects prior to the work shift. Potential fall height measured to be 23.6 feet.
Recent events (2)
- — I (S) $4436.5
- — Z (S) $8873
1926.451 F04
- Issued
- Apr 20, 2017
- Penalty
- Initial $8,873 · Current $0 Reduced
General-duty citation text
29 CFR 1926.451(f)(4): Any part of a scaffold damaged or weakened such that its strength is less than that required by paragraph (a) of this section shall be immediately repaired or replaced, braced to meet those provisions, or removed from service until repaired. On February 10, 2017, located on the North Wing of area D23, employees were exposed to fall hazards while performing masonry work from a tubular welded frame scaffold with defective adjustable saddle hangers that had not been removed from service prior to employees use of the scaffolding system. Potential fall height measured to be 23.6 feet.
Recent events (2)
- — I (S) $0
- — Z (S) $8873
1926.454 A
- Issued
- Apr 20, 2017
- Abate by
- Jun 7, 2017
- Penalty
- Initial $8,873 · Current $4,437 Reduced
General-duty citation text
29 CFR 1926.454(a): The employer shall have each employee who performs work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. On February 10, 2017, located throughout the work-site, employees working for Weisbrod Masonry, Inc. performing masonry work from a tubular welded frame scaffold had not receive training to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
- — I (S) $4436.5
- — Z (S) $8873
More inspections at Weisbrod Masonry, INC.
View Weisbrod Masonry, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342096872.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.