SAINT LOUIS, MO —
OSHA Inspection: GMP METAL PRODUCTS
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of GMP METAL PRODUCTS in 3883 DELOR STREET, SAINT LOUIS, MO 63116 (NAICS 332116). OSHA activity number 342099033.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch GMP Metal Products — free
Get an email when a new federal OSHA severe-injury report for GMP Metal Products is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- GMP METAL PRODUCTS
- Site address
- 3883 DELOR STREET
- City
- SAINT LOUIS
- State
- MO
- ZIP
- 63116
- Mailing
- 3883 DELOR STREET, SAINT LOUIS, MO 63116
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332116
- Employees
- 60
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C04 I
- Issued
- Feb 28, 2017
- Abate by
- May 14, 2017
- Penalty
- Initial $6,338 · Current $2,535 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented, and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section: At 3883 Delor Street, St. Louis, MO 63116, specifically Building No. 2, Work Center #1902, the employer did not ensure that a specific procedure was developed, documented, or utilized for the Bystronic Press Brake, m/n Beyeler PR320 1 PC. Authorized employee(s) were exposed to a serious caught-in hazard. This violation was observed on 02/21/17.
Recent events (2)
- — I (S) $2535.2
- — Z (S) $6338
1910.147 C07 I A
- Issued
- Feb 28, 2017
- Abate by
- May 14, 2017
- Penalty
- Initial $6,338 · Current $2,535 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): The employer did not ensure that each authorized employee received training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control: At 3883 Delor Street, St. Louis, MO 63116, specifically Building No. 2, Work Center #1902, the employer did not ensure that authorized employee(s) were able to isolate the Bystronic Press Brake, m/n Beyeler PR320 1 PC, from all of its energy sources. Authorized employee(s) were exposed to a serious caught-in hazard because of this lack of training. This violation was observed on 02/13/17.
Recent events (2)
- — I (S) $2535.2
- — Z (S) $6338
1910.147 D03
- Issued
- Feb 28, 2017
- Abate by
- May 14, 2017
- Penalty
- Initial $6,338 · Current $2,535 Reduced
General-duty citation text
29 CFR 1910.147(d)(3): All energy isolating devices that are needed to control the energy to the machine or equipment were not physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s): At 3883 Delor Street, St. Louis, MO 63116, specifically Building No. 2, Work Center #1902, the employer did not ensure that suitable lockout devices were used on the Bystronic Press Brake, m/n Beyeler PR320 1 PC, to isolate gravity. Authorized employee(s) were exposed to a serious caught-in hazard. This violation was observed on 02/13/17.
Recent events (2)
- — I (S) $2535.2
- — Z (S) $6338
1910.212 A03 II
- Issued
- Feb 28, 2017
- Abate by
- Apr 14, 2017
- Penalty
- Initial $8,873 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machines were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during the operating cycle(s): At 3883 Delor Street, St. Louis, MO 63116, specifically Building No. 2, Work Center #1902, the employer did not ensure that the point of operation belonging to the Bystronic Press Brake, m/n Beyeler PR320 1 PC, was guarded. Operator(s) were exposed to a serious caught-in hazard. This violation was observed on 02/13/17.
Recent events (2)
- — I (S) $0
- — Z (S) $8873
1910.147 C06 I
- Issued
- Feb 28, 2017
- Abate by
- May 14, 2017
- Penalty
- Initial $2,534 · Current $1,014 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed: a/ At 3883 Delor Street, St. Louis, MO 63116, the employer did not ensure that periodic audits were performed during calendar years 2015 and 2016. GMP Metal Products was previously cited for a violation of this occupational safety and health standard or its equivalent standard, 29 CFR 1910.212(a)(1) which was contained in OSHA inspection number 963518, citation number 2, item number 1, and was affirmed as a final order on 05/13/14, with respect to a workplace located at 3883 Delor Street, St. Louis, MO 63116.
Recent events (2)
- — I (R) $1013.6
- — Z (R) $2534
1910.212 A01
- Issued
- Feb 28, 2017
- Abate by
- May 14, 2017
- Penalty
- Initial $12,676 · Current $5,070 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect the operator(s) and other employees in the machine area from hazard(s) such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: At 3883 Delor Street, St. Louis, MO 63116, specifically inside of the Tool & Die Shop, the Mattison Rotary Grinder, m/n 24, s/n 24-342, was inadequately guarded. This violation was observed on 02/13/17. At 3883 Delor Street, St. Louis, MO 63116, on 02/13/17, specifically inside of the 100 Department, the 13 stock holders belonging to the following shears were inadequately guarded: a/ Cincinnati Shear, m/n 25. b/ Cincinnati Shear, m/n 14. GMP Metal Products was previously cited for a violation of this occupational safety and health standard or its equivalent standard, 29 CFR 1910.212(a)(1) which was contained in OSHA inspection number 963518, citation number 1, item number 2, and was affirmed as a final order on 05/13/14, with respect to a workplace located at 3883 Delor Street, St. Louis, MO 63116.
Recent events (2)
- — I (R) $5070.4
- — Z (R) $12676
More inspections at GMP Metal Products
Dec 1, 2021
SAINT LOUIS, MO
Mar 18, 2014
SAINT LOUIS, MO
Apr 24, 2009
ST. LOUIS, MO
Mar 10, 2004
ST. LOUIS, MO
Mar 10, 2004
ST. LOUIS, MO
View GMP Metal Products's full OSHA safety record →
More inspections in this industry (NAICS 332116)
Apr 23, 2026
Tecklane Manufacturing, INC. · SPRINGDALE, PA
Feb 10, 2026
Blase Manufacturing Company · STRATFORD, CT
Jan 7, 2026
110505 - RAO Manufacturing Company · MINNEAPOLIS, MN
Dec 2, 2025
110353 - M-M Manufacturing INC DBA Product Fabricators · PINE CITY, MN
Aug 27, 2025
68342 - Cannon Automotive Solutions - Bowling Green INC · RICHARDSVILLE, KY
More inspections in MO
Jul 17, 2026
United Parcel Service · SAINT LOUIS, MO
Jul 15, 2026
Triple J Construction, LLC. · PLATTE CITY, MO
Jul 14, 2026
Torchylo Builders, LLC. · CLINTON, MO
Jul 13, 2026
Jorge Merida · BLUE SPRINGS, MO
Jul 9, 2026
Niagara Bottling · KANSAS CITY, MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342099033.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.