BURLINGTON, CT —
OSHA Inspection: CRESCENT MANUFACTURING
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of CRESCENT MANUFACTURING in 700 GEORGE WASHINGTON TURNPIKE, BURLINGTON, CT 06013 (NAICS 332722). OSHA activity number 342106804.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CRESCENT MANUFACTURING
- Site address
- 700 GEORGE WASHINGTON TURNPIKE
- City
- BURLINGTON
- State
- CT
- ZIP
- 06013
- Mailing
- 700 GEORGE WASHINGTON TURNPIKE, BURLINGTON, CT 06013
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332722
- Employees
- 35
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.36 D01
- Issued
- Mar 31, 2017
- Abate by
- Aug 21, 2017
- Penalty
- Initial $3,232 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge: PRESS AREA On, or about, February 15, 2017, the emergency exit door for the press area was locked and not able to be opened without the deadbolt being manually unlocked.
Recent events (3)
- — F (O) $1500
- — C (S) $3232
- — Z (S) $3232
1910.133 A01
- Issued
- Mar 31, 2017
- Abate by
- Aug 21, 2017
- Penalty
- Initial $4,310 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation: WASH DEPARTMENT On, or about February 15, 2017, the employer did not require employees to use chemical goggles, and, or a face shield when employees worked with Altrabrite EZ 500, a corrosive cleaner with a pH was 12.4 containing disodium metasilicate.
Recent events (3)
- — F (O) $1500
- — C (S) $4310
- — Z (S) $4310
1910.1200 E01
- Issued
- Mar 31, 2017
- Abate by
- Aug 21, 2017
- Penalty
- Initial $3,232 · Current $0 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: FACILITY On, or about, February 15, 2017, the employer failed to develop and maintain a written hazard communication program when employees worked with chemicals including, but not limited to, Altrabrite EZ 500, a corrosive parts cleaner with a pH of 12.4 containing disodium metasilicate.
Recent events (3)
- — F (O) $0
- — C (S) $3232
- — Z (S) $3232
1910.1200 H03 IV
- Issued
- Mar 31, 2017
- Abate by
- Aug 21, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(3)(iv): Employee training did not include the details of the hazard communication program developed by the employer, including an explanation of the labeling system and the safety data sheets, and how employees can obtain and use the appropriate hazard information: FACILITY On, or about, February 15, 2017, the employer failed to train employees on the new Globally Harmonized System (GHS) safety data sheet format. Employees worked with a variety of chemicals including, but not limited to, Altrabrite EZ 500, a corrosive parts cleaner with a pH of 12.4 containing disodium metasilicate.
Recent events (3)
- — F (O) $0
- — C (S) $0
- — Z (S) $0
1910.151 C
- Issued
- Mar 31, 2017
- Abate by
- May 17, 2017
- Penalty
- Initial $4,310 · Current $0 Reduced
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: WASH DEPARTMENT On, or about February 15, 2017, the employer did not make suitable facilities for quick drenching or flushing of the eyes available within the work area when employees worked with Altrabrite EZ 500, a corrosive parts cleaner with a pH of 12.4.
Recent events (3)
- — F (S) $0
- — C (S) $4310
- — Z (S) $4310
1910.212 B
- Issued
- Mar 31, 2017
- Abate by
- May 17, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: PRESS AREA On, or about February 15, 2017, the following presses, used to fabricate custom parts, were not securely anchored to the floor to prevent walking or moving: (a) The Modern Hydraulic 200 Ton Press, Serial Number (1334) (b) The RK Machinery, 100 Ton Press Master Press, Serial Number (019721151T)
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
More inspections at Crescent Manufacturing
View Crescent Manufacturing's full OSHA safety record →
More inspections in this industry (NAICS 332722)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342106804.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.