Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: NORTHWEST GEORGIA PAVING, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of NORTHWEST GEORGIA PAVING, INC. in 501 WEST MAY STREET, CALHOUN, GA 30703 (NAICS 238990). OSHA activity number 342114527.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Northwest Georgia Paving, INC. — free Get an email when a new federal OSHA severe-injury report for Northwest Georgia Paving, INC. is published. One employer, no account, unsubscribe in one click.
Site address
501 WEST MAY STREET
City
CALHOUN
State
GA
ZIP
30703
Mailing
501 WEST MAY STREET, CALHOUN, GA 30703
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238990
Employees
200
Ownership type
A

5 citations on file for this inspection.

1910.151 C

Serious Gravity 5 1 instance 1 exposed
Issued
Jun 6, 2017
Penalty
Initial $8,149 · Current $3,830 Reduced

Hazardous substances 2310

29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use:   a) Maintenance Department: On or about 2/13/17, the employees were exposed to chemical hazards, in that quick drench of the eyes and body was not provided to employees while using corrosive chemicals such as but not limited to Aluminum Brightener.
Recent events (2)
  • — I (S) $3830.03
  • — Z (S) $8149

1910.177 D02

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 6, 2017
Penalty
Initial $8,149 · Current $3,830 Reduced
29 CFR 1910.177(d)(2): The employer did not provide a restraining device or a barrier to be used when inflating tires on single piece rim wheels which are not bolted onto the vehicles:   a) Maintenance Department: On or about, 2/13/17, employees were exposed to struck-by hazards, in that restraining devices such as but not limited to tire cages were not provided to employees while mounting or demounting truck tires.
Recent events (2)
  • — I (S) $3830.03
  • — Z (S) $8149

1910.212 B

Serious Gravity 5 1 instance 1 exposed
Issued
Jun 6, 2017
Penalty
Initial $6,519 · Current $3,064 Reduced
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving:   a) Maintenance Department:  On or about 2/13/17, employees were exposed to struck-by hazards, in that the drill press (model #1200/SN #120v083) was not bolted down to the floor while employees are performing task such as but not limited to drilling holes into materials.
Recent events (2)
  • — I (S) $3063.93
  • — Z (S) $6519

1910.215 A04

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 6, 2017
Penalty
Initial $6,519 · Current $3,064 Reduced
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work:  a) Maintenance Department: On or about 2/13/17, employees were exposed to caught-in hazards, in that the work rest on the left side of the Baldor (N4-87) was not provided to employees while performing task such as but not limited to metal fabrication.    b) Maintenance Department: On or about 2/13/17, employees were exposed to caught-in hazards, in that the work rest on the right side of the Baldor (N4-87) was not adjusted within 1/8 inch of the wheel provided to employees while performing task such as but not limited to metal fabrication.
Recent events (2)
  • — I (S) $3063.93
  • — Z (S) $6519

1910.215 B09

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 6, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.215(b)(9): Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel:  a) Maintenance Department: On or about 2/13/17, employees were exposed to caught-in hazards, in that the tongue guard on the left side of the Baldor (N4-87) was not provided to employees while performing task such as but not limited to metal fabrication.    b) Maintenance Department: On or about 2/13/17, employees were exposed to caught-in hazards, in that the tongue guard on the right side of the Baldor (N4-87) was not kept within 1/4 inch of the wheel provided to employees while performing task such as but not limited to metal fabrication.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Northwest Georgia Paving, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342114527.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.