PINE, CO —
OSHA Inspection: MOUNTAIN VIEW WASTE SYSTEMS, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MOUNTAIN VIEW WASTE SYSTEMS, LLC in 66615 HIGHWAY 285, PINE, CO 80470 (NAICS 562219). OSHA activity number 342127248.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MOUNTAIN VIEW WASTE SYSTEMS, LLC
- Site address
- 66615 HIGHWAY 285
- City
- PINE
- State
- CO
- ZIP
- 80470
- Mailing
- PO BOX 720, PINE, CO 80470
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 562219
- Employees
- 36
- Ownership type
- A
Citations
18 citations on file for this inspection.
5(a)(1)
- Issued
- Apr 24, 2017
- Abate by
- May 11, 2017
- Penalty
- Initial $5,070 · Current $3,100 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to ejection and crushing hazards from operating a powered industrial truck without a seat belt: (a) On or about February 23, 2017, and at times prior, employees were exposed to ejection and crushing hazards while operating the Hyster model H80XL forklift which was not equipped with a seat belt. The hazard was exacerbated by cushion tires that showed spalling, chunking, and flat spots, conditions that can lead to unbalanced and bouncy operation of the forklift. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $3100
- — Z (S) $5070
1910.178 L01 II
- Issued
- Apr 24, 2017
- Abate by
- May 11, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(1)(ii): The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a powered industrial truck: (a) On or about February 23, 2017, and at times prior, the employer did not ensure employees were trained to operate the forklift on site prior to assigning the employees to use it. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L06
- Issued
- Apr 24, 2017
- Abate by
- May 11, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l): (a) On or about February 23, 2017, and at times prior, the employer did not document a certification that each forklift operator is competent to operate the forklift on site. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 Q01
- Issued
- Apr 24, 2017
- Abate by
- May 11, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(1): A power-operated industrial truck that was not in safe operating condition was not removed from service: (a) On or about February 23, 2017, and at times prior, employees who operate the Hyster model H80XL forklift, were exposed to tipping and ejection hazards because it had not been maintained to ensure its tires were safe for use. The cushion tires were spalling, chunking, and had flat spots, conditions that can lead to unbalanced and bouncy operation of the forklift and cause changes the load center of a load, thereby affecting the stability of the forklift. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.22 A01
- Issued
- Apr 24, 2017
- Abate by
- May 11, 2017
- Penalty
- Initial $3,802 · Current $1,900 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): (1) All places of employment, passageways, storerooms, service rooms, and walking-working surfaces were not kept in a clean, orderly, and sanitary condition: (a) On or about February 23, 2017, and at times prior, employees were exposed to slip, trip and fall hazards throughout the shop because of clutter in, but not limited to, the following locations: (1) at the eye wash station, (2) in the parts storage area, (3) south wall of the west bay, and (4) on the mezzanine. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $1900
- — Z (S) $3802
1910.303 G01 II
- Issued
- Apr 24, 2017
- Abate by
- May 11, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1)(ii): The required working space about electric equipment rated 600 volts, nominal, or less to ground, was used for storage: (a) On or about February 23, 2017, and at times prior, employees were exposed to electrical, fire, and smoke inhalation hazards in that the electrical panels in the following locations were blocked from access by stored items: (1) The parts room of the shop, the south east room of the shop area. (2) In the west bay on the south wall. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.28 B01 I
- Issued
- Apr 24, 2017
- Abate by
- Jul 1, 2017
- Penalty
- Initial $5,070 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.28(b)(1)(i): The employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that was 4 feet (1.2 m) or more above a lower level was protected from falling by one or more of the following: Guardrail systems, safety net systems, or personal fall arrest systems: (a) On or about February 23, 2017, and at times prior, employees were exposed to falls of greater than four feet: (1) into the trash transfer trailer while unloading trash trucks; (2) into each of two horizontal ram recycling compactors (east and west) while unloading trucks with recycled materials; and (3) over the south wall of the south (west) compactor to the ground where the trailer is parked while operating the compactor. Abatement Note: Abatement certification and documentation are required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $2500
- — Z (S) $5070
1910.134 C01
- Issued
- Apr 24, 2017
- Abate by
- May 11, 2017
- Penalty
- Initial $5,070 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: (a) On or about February 23, 2017, and at times prior, the employer required an employee to use a respirator during painting tasks but did not ensure that the employee was safe while using the respirator, in that the employer had not established and implemented a written respiratory protection program. Abatement Note: Abatement certification and documentation are required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $2500
- — Z (S) $5070
1910.134 G01 I A
- Issued
- Apr 24, 2017
- Abate by
- May 11, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(g)(1)(i)(A): Respirators with tight-fitting facepieces were worn by employees who had facial hair that came between the sealing surface of the facepiece and the face or that interfered with valve function: (a) On or about February 22, 2017, and at times prior, an employee who was required to wear tight-fitting respirator while painting had facial hair between the skin and seal of the tight fitting respirator. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.253 B04 III
- Issued
- Apr 24, 2017
- Penalty
- Initial $4,310 · Current $2,200 Reduced
General-duty citation text
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one-half hour: (a) On or about February 23, 2017, and at times prior, employees were exposed to fire and explosion hazards from storing compressed gas cylinders of oxygen and fuel-gas (acetylene) together between the doors to the east bay and the center bay in the shop.
Recent events (2)
- — I (S) $2200
- — Z (S) $4310
1910.303 B01 VIII
- Issued
- Apr 24, 2017
- Abate by
- May 11, 2017
- Penalty
- Initial $3,802 · Current $1,900 Reduced
General-duty citation text
29 CFR 1910.303(b)(1)(viii): Electrical equipment was not free from recognized hazards that were likely to cause death or serious physical harm to employees based on other factors that contribute to the practical safeguarding of persons using or likely to come in contact with the equipment: (a) On or about February 23, 2017, and at times prior, employees were exposed to electrical and fire hazards in that the knife switch controlling the On-Off function of the shop air compressor was locked in the On position. Employees were using the circuit breaker to turn the compressor On and Off. Electrical malfunction of the compressor could not have been immediately addressed by putting the knife switch in the Off position. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $1900
- — Z (S) $3802
1910.303 B02
- Issued
- Apr 24, 2017
- Abate by
- May 11, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: (a) On or about February 23, 2017, and at times prior, employees were exposed to fire hazards because the circuit breaker that protects the shop air compressor system from overcurrent conditions, was used as an On-Off switch. The breaker was not marked for "switch duty" and was not designed to be used as an On-Off switch. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 E01
- Issued
- Apr 24, 2017
- Abate by
- Jun 9, 2017
- Penalty
- Initial $3,802 · Current $1,900 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (a) On or about February 23, 2017, and at times prior, the employer had not developed a written hazard communication program which includes a chemical inventory, container labeling, safety data sheets, and training. In the work place employees encounter many chemicals including but not limited to, diesel fuel (flammable; skin, eye and respiratory irritant; central nervous system effects; combustion results in carbon monoxide); Brakeleen Brake Parts Cleaner (extremely flammable; toxic if swallowed; skin irritant; serious eye irritant); and epoxy primer catalyst (acute toxicity). Abatement Note: Abatement certification and documentation are required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $1900
- — Z (S) $3802
1910.1200 F06 II
- Issued
- Apr 24, 2017
- Abate by
- Jun 9, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(f)(6)(ii): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals and which, in conjunction with the other information immediately available to employees under the hazard communication program, which would provide employees with the specific information regarding the physical and health hazards of the hazardous chemical: (a) On or about February 23, 2017, and at times prior, employees were exposed to chemicals in containers and the containers were not properly labeled. Containers with inadequate labels include, but are not limited to, the 10,000 gallon diesel tank; the hydraulic fluid, engine oil and antifreeze tanks on the mezzanine; used oil in the west bay; diesel exhaust fluid in the west bay; coolant in the handheld container in the west bay. Abatement Note: Abatement certification and documentation are required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 G01
- Issued
- Apr 24, 2017
- Abate by
- Jun 9, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(g)(1): Employers did not have a safety data sheet in the workplace for each hazardous chemical which they use: (a) On or about February 23, 2017, and at times prior, employees were exposed to chemicals at work for which the company did not have safety data sheets immediately available, including but not limited to, acetylene (flammable, explosive); diesel fuel (flammable; skin, eye and respiratory irritant; central nervous system effects; combustion results in carbon monoxide); Brakeleen Brake Parts Cleaner (extremely flammable; toxic if swallowed; skin irritant; serious eye irritant); and Kem Aqua 400 Waterborne Enamel (flammable; serious eye irritant; suspected of damaging fertility; suspected of causing cancer). Abatement Note: Abatement certification and documentation are required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 H01
- Issued
- Apr 24, 2017
- Abate by
- Jun 9, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: (a) On or about February 23, 2017, and at times prior, the employer had not trained employees on the hazards of chemicals used at the work site. Chemicals in the work place include, but were not limited to, diesel fuel (flammable; skin, eye and respiratory irritant; central nervous system effects; combustion results in carbon monoxide); Brakeleen Brake Parts Cleaner (extremely flammable; toxic if swallowed; skin irritant; serious eye irritant); and epoxy primer catalyst (acute toxicity). Abatement Note: Abatement certification and documentation are required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (S) $0
- — Z (S) $0
1904.32 B06
- Issued
- Apr 24, 2017
- Abate by
- May 11, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1904.32(b)(6): The Summary of Work-Related Injuries and Illnesses (OSHA Form 300A or equivalent) for the previous year was not posted between February 1st and April 30th: (a) On or about February 23, 2017, and at times prior, the employer had not posted the annual summary of work-related injuries and illnesses for 2016. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (O) $0
- — Z (O) $0
1904.40 A
- Issued
- Apr 24, 2017
- Abate by
- May 11, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1904.40(a): The employer did not provide an authorized government representative the records within the four business hours: (a) On or about February 23, 2017, the employer failed to provide copies of the injury and illness records to OSHA within four hours of the request for the records. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Mountain View Waste Systems, LLC
View Mountain View Waste Systems, LLC's full OSHA safety record →
More inspections in this industry (NAICS 562219)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342127248.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.