Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: UNITED STRUCTURAL WORKS, INC.

Referral inspection · Health discipline

On , OSHA opened a referral health inspection of UNITED STRUCTURAL WORKS, INC. in 45 HEMLOCK DRIVE, CONGERS, NY 10920 (NAICS 332312). OSHA activity number 342127735.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch United Structural Works, INC. — free Get an email when a new federal OSHA severe-injury report for United Structural Works, INC. is published. One employer, no account, unsubscribe in one click.
Site address
45 HEMLOCK DRIVE
City
CONGERS
State
NY
ZIP
10920
Mailing
45 HEMLOCK DRIVE, CONGERS, NY 10920
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332312
Employees
20
Ownership type
A

7 citations on file for this inspection.

1910.134 C01

Serious Gravity 1 1 instance 4 exposed
Issued
Jul 27, 2017
Abate by
Sep 22, 2017
Penalty
Initial $2,173 · Current $2,000 Reduced
29 CFR 1910.134(c)(1):  The employer did not develop and implement a written respiratory protection program with work site specific procedures and elements for required respirator use:     a) Welding area:     The employer did not develop a written respiratory protection program for employees who are required to wear a 3M half face respirator with P100 filters when TIG welding on structural steel. Condition noted on or about 02/23/17.    NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1,000 AS PER CFR 1903.19.
Recent events (2)
  • — I (S) $2000
  • — Z (S) $2173

1910.134 E01

Other-than-serious 1 instance 4 exposed
Issued
Jul 27, 2017
Abate by
Sep 22, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee is fit tested or required to use the respirator in the workplace:      a) Welding area:      The employer did not medically evaluate employees who are required wear a 3M half face respirator with P100 filters when using TIG welding on structural steel.  Condition noted on or about 02/23/17.      NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1,000 AS PER CFR 1903.19.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.134 F01

Other-than-serious 1 instance 4 exposed
Issued
Jul 27, 2017
Abate by
Sep 22, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.134(f)(1):  The employer did not ensure that employees using a tight-fitting facepiece respirator pass an appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT) as stated in this paragraph:    a) Welding area:    The employer did not fit test employees who are required to wear a 3M half face respirator with P100 filters when welding on structural steel.  Condition noted on or about 02/23/17.      NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1,000 AS PER CFR 1903.19.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.134 K

Other-than-serious 1 instance 4 exposed
Issued
Jul 27, 2017
Abate by
Sep 22, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.134(k): The employer did not provide effective training annually for employees who are required to use a respirator:    a) Welding area:    The employer did not provide training for employees who are required to wear a 3M half face respirator with P100 filters  when TIG welding on structural steel.  Condition noted on or about 02/23/17.      NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1,000 AS PER CFR 1903.19.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.1200 E01

Other-than-serious 1 instance 4 exposed
Issued
Jul 27, 2017
Abate by
Sep 22, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:       a)  Welding area:     Employees are exposed to hazardous chemicals such as but not limited to Carbon Dioxide; on or about 02/23/17.    NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1,000 AS PER CFR 1903.19.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 G08

Other-than-serious 1 instance 4 exposed
Issued
Jul 27, 2017
Abate by
Sep 22, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(8):   The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical      a)  Welding area:     The employer did not maintain copies of safety data sheets for hazardous chemicals such as but not limited to Carbon Dioxide; on or about 02/23/17.    NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1,000 AS PER CFR 1903.19.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 H01

Other-than-serious 1 instance 4 exposed
Issued
Jul 27, 2017
Abate by
Sep 22, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:      a) Welding area:     The employer did not train employees who are required to use hazardous chemicals such as but not limited to Carbon Dioxide; on or about 02/23/17.    NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1,000 AS PER CFR 1903.19.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View United Structural Works, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342127735.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.