ROCHESTER, NY —
OSHA Inspection: ENBI ROCHESTER INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ENBI ROCHESTER INC. in 1661 LYELL AVENUE, ROCHESTER, NY 14606 (NAICS 326291). OSHA activity number 342128444.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ENBI ROCHESTER INC.
- Site address
- 1661 LYELL AVENUE
- City
- ROCHESTER
- State
- NY
- ZIP
- 14606
- Mailing
- 1661 LYELL AVENUE, ROCHESTER, NY 14606
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326291
- Employees
- 36
- Ownership type
- A
Citations
2 citations on file for this inspection.
1910.147 C04 I
- Issued
- Mar 9, 2017
- Abate by
- Apr 10, 2017
- Penalty
- Initial $7,243 · Current $4,500 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) On or about 02/23/17 in the production area; employees were exposed to being struck by moving parts while performing service and maintenance, such as but not limited to, replacing brass fittings on the air nozzles, greasing and lubricating, on the grit blaster when the employer did not develop a written procedure to control the two energy sources (air and electrical power) of this equipment. b) On or about 02/23/17 in the production area; employees were exposed to being struck by moving parts while removing and replacing the grinding wheels on the CNC grinders when the employer did not require use of a procedure; i.e. shut off and lock out the power source on this type of equipment, prior to performing this activity. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $4500
- — Z (S) $7243
1910.147 D04
- Issued
- Mar 9, 2017
- Abate by
- Apr 10, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(4): A lockout or tagout device was not attached to each energy isolation device by authorized employees: a) On or about 02/23/17 in the production area; employees were exposed to being struck by moving parts while performing service and maintenance, such as but not limited to, replacing brass fittings on the air nozzles, greasing and lubricating, on the grit blaster when the employer did not require the attachment of a lock or tag to the two energy sources (air and electrical power) of this equipment prior to these activities. b) On or about 02/23/17 in the production area; employees were exposed to being struck by moving parts while removing and replacing the grinding wheels on the CNC grinders when the employer did not require employees to attach a lock or tag on the energy source of this equipment prior to performing this activity. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Enbi Rochester INC.
View Enbi Rochester INC.'s full OSHA safety record →
More inspections in this industry (NAICS 326291)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342128444.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.