LOCKPORT, NY ·
OSHA Inspection: NIAGARA PRODUCE OF LOCKPORT, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of NIAGARA PRODUCE OF LOCKPORT, INC. in 112 CHESTNUT STREET, LOCKPORT, NY 14094 (NAICS 445110). OSHA activity number 342129863.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NIAGARA PRODUCE OF LOCKPORT, INC.
- Site address
- 112 CHESTNUT STREET
- City
- LOCKPORT
- State
- NY
- ZIP
- 14094
- Mailing
- 112 CHESTNUT STREET, LOCKPORT, NY 14094
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 445110
- Employees
- 35
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1910.132 F02
- Issued
- Mar 31, 2017
- Abate by
- May 17, 2017
- Penalty
- Initial $8,873 · Current $5,700 Reduced
General-duty citation text
29 CFR 1910.132(f)(2): The employer did not require employees to demonstrate an understanding of the training specified in paragraph (f)(1) of this section, and the ability to use PPE properly, before being allowed to perform work requiring the use of PPE; a) On or about 02/27/17 in the Deli area; employee was exposed to an amputation hazard while cleaning the meat slicer without wearing cut resistant gloves when the employer did not ensure employee demonstrated an understanding of the need to wear cut resistant gloves, while performing this task, or the ability to use this PPE before assigning them this task. ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- · I (S) $5700
- · Z (S) $8873
1910.147 C04 I
- Issued
- Mar 31, 2017
- Abate by
- May 17, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) On or about 02/27/17 in the Deli area; employer did not ensure employees utilized the Lockout Safety Procedure for the Hobart #291 meat slicers, prior to cleaning the slicers without unplugging them, exposing them to an amputation hazard. b) On or about 02/27/17 in the Deli area; employer did ensure employees utilized the Lockout Safety Procedure for the Hobart meat grinder, prior to disassembly, cleaning and reassembly of the grinder without unplugging the machine, exposing them to an amputation hazard. ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.147 C07 I A
- Issued
- Mar 31, 2017
- Abate by
- May 17, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation; a) On or about 02/27/17 in the Deli area; employees were exposed to amputation hazards while cleaning the Hobart slicers when the employer did not ensure employees were trained on utilizing the Lockout Safety Procedures for the Hobart #291 meat slicers. b) On or about 02/27/17 in the Deli area; employees were exposed to amputation hazards while disassembly, cleaning and reassembly of the meat grinder when the employer did not ensure employees were trained on utilizing the Lockout Safety Procedure for the Hobart meat grinder. ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
- · I (S) $0
- · Z (S) $0
1904.39 A02
- Issued
- Mar 31, 2017
- Abate by
- Apr 18, 2017
- Penalty
- Initial $3,500 · Current $0 Reduced
General-duty citation text
29 CFR 1904.39(a)(2): 29 CFR 1904.39(a)(2): The employer did not report an amputation of an employee as a result of a work-related incident to OSHA within twenty-four (24) hours, either by telephone or in person to the OSHA Area Office that is nearest to the site of incident, by telephone to the OSHA toll-free central telephone number, 1-800-321-OSHA (1-800-321-6742), or by electronic submission using the reporting application located on the OSHA public web site at www.osha.gov: a) On or about 02/27/17 at the 112 Chestnut Street, Lockport, New York; an employee was involved in a workplace incident which occurred on 01/29/17 that resulted in an amputation injury and employer did not report to this to the OSHA Buffalo area office. NO ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · I (O) $0
- · Z (O) $3500
1904.29 B03
- Issued
- Mar 31, 2017
- Abate by
- Apr 18, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1904.29(b)(3): Each recordable injury or illness was not entered on the OSHA 300 Log and/or an incident report (OSHA Form 301 or equivalent) within seven (7) days of receiving information that a recordable injury or illness has occurred: a) On or about 02/27/17 at the 112 Chestnut Street, Lockport, New York; an employee was involved in a workplace incident which occurred on 01/29/17 that resulted in an amputation injury and employer did not record or maintain an OSHA 300 log. NO ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections in this industry (NAICS 445110)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 342129863.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.