HUDSON, WI —
OSHA Inspection: ANCHOR PAPER COMPANY
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of ANCHOR PAPER COMPANY in 1212 BEAUDRY BLVD., HUDSON, WI 54016 (NAICS 322299). OSHA activity number 342130291.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ANCHOR PAPER COMPANY
- Site address
- 1212 BEAUDRY BLVD.
- City
- HUDSON
- State
- WI
- ZIP
- 54016
- Mailing
- 1212 BEAUDRY BLVD., HUDSON, WI 54016
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 322299
- Employees
- 10
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.28 B02 II
- Issued
- Jul 21, 2017
- Abate by
- Aug 1, 2017
- Penalty
- Initial $8,873 · Current $6,210 Reduced
General-duty citation text
29 CFR 1910.28(b)(2)(ii): When any portion of a guardrail system, gate, or chains was removed, and an employee must lean through or over the edge of the access opening to facilitate hoisting, employees were not protected from falling by a personal fall arrest system: (a) Upper woodshop mezzanine; On or about February 20, 2017, personal fall arrest systems were not worn during hoisting operations while the guardrail was removed and employees leaned over an unprotected edge.
Recent events (2)
- — I (S) $6210
- — Z (S) $8873
1910.212 A01
- Issued
- Jul 21, 2017
- Abate by
- Aug 4, 2017
- Penalty
- Initial $5,070 · Current $3,550 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Upper shop/maintenance area; Guarding was not provided for rotating parts and flying chips on a drill press.
Recent events (2)
- — I (O) $3550
- — Z (S) $5070
1910.219 D01
- Issued
- Jul 21, 2017
- Abate by
- Aug 18, 2017
- Penalty
- Initial $7,605 · Current $5,325 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): (a) Production area; Power transmission pulleys were not guarded on equipment including, but not limited to the shear table.
Recent events (2)
- — I (S) $5325
- — Z (S) $7605
1910.219 E01 I
- Issued
- Jul 21, 2017
- Abate by
- Aug 18, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt: (a) Production area; Power transmission belts were not guarded on equipment including, but not limited to the guillotine shear table.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 E03 I
- Issued
- Jul 21, 2017
- Abate by
- Aug 18, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical and inclined belts were not enclosed by a guard conforming to standards in paragraphs (m) and (o) of this section: (a) Production area; Power transmission belts were not guarded on equipment including, but not limited to the sheeter machine.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1904.30 A
- Issued
- Jul 21, 2017
- Abate by
- Aug 4, 2017
- Penalty
- Initial $1,268 · Current $885 Reduced
General-duty citation text
29 CFR 1904.30(a): The employer did not keep a separate OSHA 300 Log for each establishment that was expected to be in operation for one year or longer: (a) 1212 Beaudry Blvd., Hudson, WI: A separate injury/illness log (OSHA form 300) was not maintained for the Hudson, WI location, which had been in operation under the corporate structure since February 2013.
Recent events (2)
- — I (O) $885
- — Z (O) $1268
1910.305 G01 IV C
- Issued
- Jul 21, 2017
- Abate by
- Jul 31, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(C): Flexible cords and cables were used where run through doorways, windows, or similar openings: (a) Upper shop/maintenance area; The flexible cord of a drill press was routed through an existing doorway.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Anchor Paper Company
View Anchor Paper Company's full OSHA safety record →
More inspections in this industry (NAICS 322299)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342130291.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.