Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: POWER FACTOR, LLC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of POWER FACTOR, LLC in 160 MAIN ROAD NAVAL WEAPONS STATION YORKTOWN, YORKTOWN, VA 23691 (NAICS 238210). OSHA activity number 342134319.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Power Factor, LLC — free Get an email when a new federal OSHA severe-injury report for Power Factor, LLC is published. One employer, no account, unsubscribe in one click.
Establishment
POWER FACTOR, LLC
Site address
160 MAIN ROAD NAVAL WEAPONS STATION YORKTOWN
City
YORKTOWN
State
VA
ZIP
23691
Mailing
1 MACE AVE, BALTIMORE, MD 21221
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238210
Employees
1
Ownership type
A

3 citations on file for this inspection.

1926.501 B11

Serious Gravity 5 1 instance 1 exposed
Issued
Mar 22, 2017
Penalty
Initial $6,338 · Current $4,000 Reduced
29 CFR 1926.501(b)(11): Each employee on a steep roof with unprotected sides and edges 6 feet or more above lower levels was not protected from falling by guardrail systems with toeboards, safety net systems, or personal fall arrest systems:      a)    Naval Weapons Station Yorktown: On or about 02/23/2017, an employee walked on the ridge of a 5 in 12 sloped roof, with unprotected sides and edges, approximately 36 ft. above the ground, and was not protected from a possible fall.      No abatement certification or documentation required.
Recent events (2)
  • — I (S) $4000
  • — Z (S) $6338

1926.502 D06 I

Serious Gravity 5 1 instance 1 exposed
Issued
Mar 22, 2017
Penalty
Initial $6,338 · Current $4,000 Reduced
29 CFR 1926.502(d)(6)(i): A snaphook not of the design type was engaged (i) directly to webbing, rope or wire rope; (ii) to each other; (iii) to a Dee-ring to which another snaphook or other connector is attached; (iv) to a horizontal lifeline; or (v) to any object which is incompatibly shaped or dimensioned in relation to the snaphook such that unintentional disengagement could occur by the connected object being able to depress the snaphook keeper and release itself:    (a)    Naval Weapons Station Yorktown, BEQ: On or about 02/23/2017, an employee used a rope lanyard with a snap hook that was not designed to be connected directly to the horizontal lifeline as a result employee was exposed to a 36 ft. fall hazard.    No abatement certification or documentation required.
Recent events (2)
  • — I (S) $4000
  • — Z (S) $6338

1926.503 B01

Other-than-serious 1 instance 1 exposed
Issued
Mar 22, 2017
Abate by
Apr 17, 2017
Penalty
Initial $0 · Current $0
29 CFR 1926.503(b)(1): The employer shall verify compliance with paragraph (a) of this section by preparing a written certification record. The written certification record shall contain the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer. If the employer relies on training conducted by another employer or completed prior to the effective date of this section, the certification record shall indicate the date the employer determined the prior training was adequate rather than the date of actual training.  a)    Naval Weapons Station Yorktown: On or about 02/23/2017, the employer did not verify compliance with paragraph (a) of this section by preparing a written certification record as required.  Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Power Factor, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342134319.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.