METHUEN, MA —
OSHA Inspection: MASS CABINETS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MASS CABINETS, INC. in 99 CROSS STREET, METHUEN, MA 01844 (NAICS 337127). OSHA activity number 342134913.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MASS CABINETS, INC.
- Site address
- 99 CROSS STREET
- City
- METHUEN
- State
- MA
- ZIP
- 01844
- Mailing
- 99 CROSS STREET, METHUEN, MA 01844
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337127
- Employees
- 24
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.213 H01
- Issued
- Mar 27, 2017
- Abate by
- May 1, 2017
- Penalty
- Initial $3,078 · Current $1,900 Reduced
General-duty citation text
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the stock being cut: (a) Location - 99 Cross Street, Methuen, MA: On or about 2/28/2017, the lower exposed portion of the blade of the Delta radial arm saw was not guarded.
Recent events (2)
- — I (S) $1900
- — Z (S) $3078
1910.213 P04
- Issued
- Mar 27, 2017
- Abate by
- May 1, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(p)(4): Belt sanding machinery was not provided with a guard at each nip point where the sanding belt ran onto a pulley, to prevent the operator's hands or fingers from coming into contact with nip points: (a) Location - 99 Cross Street, Methuen, MA: On or about 2/28/2017, the horizontal belt sander was not sufficiently guarded to prevent operator contact with the in running nip point created by its belt and the pulleys.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C01
- Issued
- Mar 27, 2017
- Abate by
- May 1, 2017
- Penalty
- Initial $345 · Current $100 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: (a) Location - 99 Cross Street, Methuen, MA: On or about 2/28/2017, the employer's hazardous energy control program does not contain information regarding employee training and periodic inspections. (b) Location - 99 Cross Street, Methuen, MA: On or about 2/28/2017, the employer's hazardous energy control procedure contained within their program is technically deficient.
Recent events (2)
- — I (O) $100
- — Z (O) $345
More inspections at Mass Cabinets, INC.
View Mass Cabinets, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337127)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342134913.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.