TULSA, OK ·
OSHA Inspection: KC WOODWORK AND FIXTURE, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of KC WOODWORK AND FIXTURE, INC. in 1131 E. EASTON ST, TULSA, OK 74120 (NAICS 337211). OSHA activity number 342143567.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- KC WOODWORK AND FIXTURE, INC.
- Site address
- 1131 E. EASTON ST
- City
- TULSA
- State
- OK
- ZIP
- 74120
- Mailing
- 1131 E. EASTON ST, TULSA, OK 74120
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337211
- Employees
- 10
- Ownership type
- Private (A)
Citations
6 citations on file for this inspection.
1910.106 E02 IV D
- Issued
- Jun 2, 2017
- Abate by
- Jun 19, 2017
- Penalty
- Initial $1,630 · Current $978 Reduced
General-duty citation text
29 CFR 1910.106(e)(2)(iv)(d): Flammable liquids were not drawn from or transferred into vessels, containers, or portable tanks within a building only through a closed piping system, from safety cans, by means of a device drawing through the top, or from a container or portable tanks by gravity through an approved self-closing valve: On or about March 1, 2017, and times prior thereto, an approved self-closing valve was not used to transfer flammable liquids such as, but not limited to, spray contact adhesive, into containers from portable drums by gravity. Employees were exposed to the hazard of fire and/or explosion.
Recent events (2)
- · I (S) $978
- · Z (S) $1630
1910.106 E06 II
- Issued
- Jun 2, 2017
- Abate by
- Jun 19, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.106(e)(6)(ii): Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 °F (37.8 °C), were dispensed into containers without the nozzle and container being electrically interconnected. On or about March 1, 2017, and times prior thereto, category 2 flammable liquids were being dispensed into containers without the nozzle and container being electrically interconnected. Employees were exposed to the hazard of fire and/or explosion.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.213 C01
- Issued
- Jun 2, 2017
- Abate by
- Jun 19, 2017
- Penalty
- Initial $3,259 · Current $1,955 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: On or about March 1, 2017, and times prior thereto, Jet 10inch circular handfed ripsaw was not guarded by an automatically adjusting hood. Employees were exposed to the hazard of being struck by the blade.
Recent events (2)
- · I (S) $1955.4
- · Z (S) $3259
1910.213 C02
- Issued
- Jun 2, 2017
- Abate by
- Jun 19, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: On or about March 1, 2017, and times prior thereto, Jet 10inch circular handfed ripsaw was not furnished with a spreader. Employees were exposed to the hazard of being struck by material.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.213 C03
- Issued
- Jun 2, 2017
- Abate by
- Jun 19, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: On or about March 1, 2017, and times prior thereto, Jet 10inch circular handfed ripsaw was not equipped with non kickback dogs. Employees were exposed to the hazard of being struck by the blade.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.1200 E01
- Issued
- Jun 2, 2017
- Abate by
- Jun 19, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: On or about March 1, 2017, and times prior thereto, the employer did not develop, implement and maintain a written hazard communication program. Employees were using chemicals such as, but not limited to lacquer thinner and premium spray grade contact adhesive. Employees were exposed to the hazard of respiratory related illness and/or fire.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections at KC Woodwork and Fixture, INC.
View KC Woodwork and Fixture, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337211)
More inspections in OK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 342143567.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.