BROWNSVILLE, TX —
OSHA Inspection: JAMESTOWN PLASTICS, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of JAMESTOWN PLASTICS, INC. in 3200 NORTH F.M. 511, BROWNSVILLE, TX 78521 (NAICS 326130). OSHA activity number 342143625.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JAMESTOWN PLASTICS, INC.
- Site address
- 3200 NORTH F.M. 511
- City
- BROWNSVILLE
- State
- TX
- ZIP
- 78521
- Mailing
- 3200 NORTH F.M. 511, BROWNSVILLE, TX 78521
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326130
- Employees
- 22
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.95 C01
- Issued
- Jun 16, 2017
- Abate by
- Jul 6, 2017
- Penalty
- Initial $7,605 · Current $2,700 Reduced
81108111
General-duty citation text
29 CFR 1910.95(c)(1): The employer did not administer a continuing, effective hearing conservation program as described in 29 CFR 1910.9(c) through (o) whenever employee noise exposures equal or exceed an 8-hour time-weighted average sound level of 85 decibels measured on the A scale, or equivalently a dose of fifty percent: On or about March 16, 2017, in the plant production area, where employees were exposed to noise hazard without a continuing, effective conservation program in place; The Inline Thermoform Press machine operator was exposed to a noise level of 88.98 dBA during a 381 minutes sampling period on March 16, 2017.
Recent events (2)
- — I (S) $2700
- — Z (S) $7605
1910.133 A03
- Issued
- Jun 16, 2017
- Abate by
- Jul 6, 2017
- Penalty
- Initial $3,802 · Current $2,700 Reduced
General-duty citation text
29 CFR 1910.133(a)(3): The employer did not ensure that each affected employee, who wore prescription lenses while engaged in operations that involved eye hazards, used protection that incorporated the prescription in its design, or wore eye protection over the prescription glasses or protective lenses with side shields: On or about March 16, 2016, and times prior thereto, at this establishment, the employer did not ensure that each affected employee, who wore prescription lenses while engaged in operations that involved eye hazards, used eye protection that incorporated the prescription in its design.
Recent events (2)
- — I (S) $2700
- — Z (S) $3802
1910.147 C01
- Issued
- Jun 16, 2017
- Abate by
- Jul 13, 2017
- Penalty
- Initial $8,873 · Current $2,700 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: At this establishment, in the plant production area, where employees were exposed to struck-by, caught-in, and electrical hazards when performing service and/or maintenance, energy control program with all required elements was not established by the employer for the following types of machines: a. Sencorp Inline Thermoform Press Machine Automatic System 1; b. Sencorp Inline Thermoform Press Machine Automatic System 2; c. Router Dual Table Machine System; d. Router Single Table Machine System; e. Tronomatic Press Machine Automatic System; f. Maac Single Station; g. DT Industries Plastics & Packaging Machine Automatic System; and, h. Cam Single Station.
Recent events (2)
- — I (S) $2700
- — Z (S) $8873
More inspections at Jamestown Plastics, INC.
View Jamestown Plastics, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 326130)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342143625.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.