OSHA Inspection: DAYTON STEEL FABRICATORS

Issued

2017-08-10 00:00:00

Abate by

2018-04-05 00:00:00

Penalty

Initial $4346.00 · Current $1304.00 Reduced

General-duty citation text

29 CFR 1910.179(j)(3): A complete periodic inspection of crane(s) had not been conducted in the past 12 months:    a) At the site, a complete inspection of a COFFING overhead crane that was in use had not taken place within the past 12 months, exposing employees to struck by hazards.

Issued

2017-08-10 00:00:00

Abate by

2018-04-05 00:00:00

Penalty

Initial $4346.00 · Current $1304.00 Reduced

General-duty citation text

29 CFR 1910.179(l)(3)(ii)(c): Control systems were not maintained to assure correct function of components:    a) At the site, control systems for a COFFING overhead crane were not maintained to assure correct function, exposing employees to struck by hazards.

Issued

2017-08-10 00:00:00

Abate by

2017-08-29 00:00:00

Penalty

Initial $4346.00 · Current $1304.00 Reduced

General-duty citation text

29 CFR 1910.184(d): Each day before being used, the sling and all fastenings and attachments were not being inspected for damage or defects by a competent person designated by the employer:   a) At the site, synthetic web slings were not inspected for damage by a competent person, exposing employees to struck by hazards.

Issued

2017-08-10 00:00:00

Abate by

2017-08-29 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.184(i)(9)(iii): Synthetic web sling(s) with snags, punctures, tears, or cuts were not immediately removed from service:  a) At the site, a synthetic web sling with visible cuts and snags was used, exposing employees to struck by hazards.

Issued

2017-08-10 00:00:00

Abate by

2017-08-29 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.184(c)(14): Slings without affixed and legible identification markings were used:  a) At the site, a synthetic web sling without legible identification markings was used to hoist steel tubing, exposing employees to struck by hazards.

Issued

2017-08-10 00:00:00

Abate by

2017-08-29 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.184(e)(1): Alloy steel sling(s) did not have permanently affixed durable identification stating size, grade, rated capacity, and reach:   a) At the site, alloy steel chain slings that were being used did not have permanently affixed and durable identification markings, exposing employees to struck by hazards.

Issued

2017-08-10 00:00:00

Abate by

2017-08-29 00:00:00

Penalty

Initial $5070.00 · Current $1521.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):   a) At the site, an FMB bandsaw was not provided with guarding at the point of operation, Model # Antares, SN# T00839, exposing employees to amputation hazards.    b) At the site, an FMB bandsaw was not provided with guarding at the point of operation, Model # Antares, SN# U00836, exposing employees to amputation hazards.

Issued

2017-08-10 00:00:00

Abate by

2017-08-29 00:00:00

Penalty

Initial $4346.00 · Current $1304.00 Reduced

General-duty citation text

29 CFR 1910.243(c)(1)(ii)(a): Safety guard(s) for portable abrasive wheel(s) did not cover the spindle end, and flange projections:  a) At the site, a DEWALT small angle grinder was used without a grinding wheel guard, exposing employees to struck by hazards.

Issued

2017-08-10 00:00:00

Abate by

2017-08-29 00:00:00

Penalty

Initial $3622.00 · Current $1087.00 Reduced

General-duty citation text

29 CFR 1910.252(b)(2)(iii): Workers and other persons adjacent to the welding area were not protected from the rays by noncombustible or flameproof screens or shields:  a) At the site, employees working adjacent to welding operations were not protected from welding rays, exposing employees to flash burns.

Issued

2017-08-10 00:00:00

Abate by

2017-08-29 00:00:00

Penalty

Initial $3622.00 · Current $1087.00 Reduced

General-duty citation text

29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet:   a) At the site, oxygen cylinders in storage were not separated from fuel-gas cylinders by a minimum distance of 20 feet or an adequate fire barrier, exposing employees to fire hazards.

Issued

2017-08-10 00:00:00

Abate by

2017-08-29 00:00:00

Penalty

Initial $3622.00 · Current $1087.00 Reduced

General-duty citation text

29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws:   a) At the site, an extension cord being used to power a DEWALT small angle grinder was not equipped with strain relief, exposing employees to electrical hazards.

Issued

2017-08-10 00:00:00

Abate by

2017-08-29 00:00:00

Penalty

Initial $3622.00 · Current $1087.00 Reduced

General-duty citation text

29 CFR 1910.334(a)(2)(ii): There was a defect or evidence of damage that could have exposes an employee to injury and the defective or damaged item was not removed from service:  a) At the site, an extension cord with damage to its outer jacket was in use, exposing employees to electrical hazards.