PHILADELPHIA, PA —
OSHA Inspection: NAVAL FOUNDRY PROPELLER CENTER
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of NAVAL FOUNDRY PROPELLER CENTER in 1701 KITTY HAWK AVENUE BLDG 20, PHILADELPHIA, PA 19112 (NAICS 336611). OSHA activity number 342148863.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NAVAL FOUNDRY PROPELLER CENTER
- Site address
- 1701 KITTY HAWK AVENUE BLDG 20
- City
- PHILADELPHIA
- State
- PA
- ZIP
- 19112
- Mailing
- 1701 KITTY HAWK AVENUE, PHILADELPHIA, PA 19112
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336611
- Employees
- 251
- Ownership type
- D
Citations
8 citations on file for this inspection.
1910.212 A01
- Issued
- Aug 23, 2017
- Abate by
- Sep 19, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks, as required by �1960.8(b): a) Centrifugal Casting - On or about 3/2/17, the employer did not provide guarding from ingoing nip points, exposing employees to amputation hazards.
Recent events (1)
- — Z (S) $0
1910.212 A04
- Issued
- Aug 23, 2017
- Abate by
- Sep 19, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(a)(4): Revolving drum(s), barrel(s), or container(s) were not guarded by enclosure(s) which were interlocked with the drive mechanism so that the barrel(s), drum(s), or container(s) could not revolve unless the enclosure(s) were in place, as required by �1960.8(b): a) Centrifugal Casting - On or about 3/2/17, the employer did not provide interlocked guards on revolving barrels, exposing employees to caught-in and struck-by hazards.
Recent events (1)
- — Z (S) $0
1910.219 C02 I
- Issued
- Aug 23, 2017
- Abate by
- Sep 19, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting, as required by �1960.8(b): a) Centrifugal Casting - On or about 3/2/17, the employer did not provide guards on the horizontal drive shaft on the centrifugal casting, exposing employees to caught-in hazards.
Recent events (1)
- — Z (S) $0
1910.219 E01 I
- Issued
- Aug 23, 2017
- Abate by
- Sep 19, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and (o), as required by �1960.8(b): a) Centrifugal Casting - On or about 3/2/17, the employer did not provide guards on the horizontal multiple V-belt on the centrifugal casting, exposing employees to caught-in hazards.
Recent events (1)
- — Z (S) $0
1910.219 H01
- Issued
- Aug 23, 2017
- Abate by
- Sep 19, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(h)(1): Projecting key(s), setscrew(s), or other projections in revolving part(s) were not removed, made flush, or guarded by metal cover(s), as required by �1960.8(b): a) Centrifugal Casting - On or about 3/2/17, the employer did not provide guards on the locking pins of a rotating barrel centrifugal casting, exposing employees to caught-in hazards.
Recent events (1)
- — Z (S) $0
1910.219 I02
- Issued
- Aug 23, 2017
- Abate by
- Sep 19, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(i)(2): Bolt(s), nuts, or setscrews used in shaft coupling(s) extended beyond the flange of the coupling and were not covered with safety sleeve(s), as required by �1960.8(b): a) Centrifugal Casting - On or about 3/2/17, the employer did not provide guards on bolted couplings on the on the centrifugal casting, exposing employees to caught-in hazards.
Recent events (1)
- — Z (S) $0
1910.303 B02
- Issued
- Aug 23, 2017
- Abate by
- Sep 19, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling, as required by �1960.8(b): a) Centrifugal Casting - On or about 3/2/17, a plug end was not installed in accordance with its listing, exposing employees to electric shock and fire hazards.
Recent events (1)
- — Z (S) $0
1910.303 B07 IV
- Issued
- Aug 23, 2017
- Abate by
- Sep 19, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(7)(iv): Mechanical execution of work. Electric equipment shall be installed in a neat and workmanlike manner. There shall be no damaged parts that may adversely affect safe operation or mechanical strength of the equipment, such as parts that are broken, bent, cut, or deteriorated by corrosion, chemical action, or overheating, as required by �1960.8(b): a) Centrifugal Casting - On or about 3/2/17, a plug end was installed in a manner requiring the use of duct tape to complete the installation, exposing employees to electric shock and fire hazards.
Recent events (1)
- — Z (S) $0
More inspections at Naval Foundry Propeller Center
View Naval Foundry Propeller Center's full OSHA safety record →
More inspections in this industry (NAICS 336611)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342148863.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.