ARDSLEY, NY ·
OSHA Inspection: SPECIFIC CONTRACTING, INC.
Programmed Related inspection · Safety discipline
At a glance
On , OSHA opened a programmed Related safety inspection of SPECIFIC CONTRACTING, INC. in 11 AGNES CIRCLE, ARDSLEY, NY 10502 (NAICS 238130). OSHA activity number 342149408.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SPECIFIC CONTRACTING, INC.
- Site address
- 11 AGNES CIRCLE
- City
- ARDSLEY
- State
- NY
- ZIP
- 10502
- Mailing
- 115 HILLVIEW AVE., YONKERS, NY 10704
What kind of inspection was it?
- Inspection type
- Programmed Related (I)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 6
- Ownership type
- Private (A)
Citations
6 citations on file for this inspection.
1926.100 A
- Issued
- Mar 17, 2017
- Penalty
- Initial $1,630 · Current $980 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: Location: entire site On or about: 3/2/17 a) Employees who were working below overhead hazards related to residential construction were not provided with hard hats. NOTE: Because abatement of this violation is already documented in the inspection casefile, the employer need not submit certification or documentation of abatement for this violation as normally required by 29 CFR 1903.19.
Recent events (2)
- · I (S) $980
- · Z (S) $1630
1926.404 F06
- Issued
- Mar 17, 2017
- Penalty
- Initial $1,630 · Current $980 Reduced
General-duty citation text
29 CFR 1926.404(f)(6): Grounding path. The path to ground from circuits, equipment, and enclosures was not permanent and continuous: location: entire site on or about: 3/2/17 a) An employee was using electrical equipment, including saws while engaged in residential carpentry. The equipment were plugged into extension cords. The grounding pin for two of the cords were missing. NOTE: Because abatement of this violation is already documented in the inspection casefile, the employer need not submit certification or documentation of abatement for this violation as normally required by 29 CFR 1903.19.
Recent events (2)
- · I (S) $980
- · Z (S) $1630
1926.501 B13
- Issued
- Mar 17, 2017
- Penalty
- Initial $3,803 · Current $2,290 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): Location: 2nd floor On or about: 3/2/17 a) Employees, engaged in residential carpentry, were not provided with fall protection. The employees were exposed to a fall of 9'3". Location: roof On or about: 3/2/17 b) Employees, installing roof sheathing, were not provided with fall protection. The employees were exposed to a fall of up to 30'. NOTE: Because abatement of this violation is already documented in the inspection casefile, the employer need not submit certification or documentation of abatement for this violation as normally required by 29 CFR 1903.19.
Recent events (2)
- · I (S) $2290
- · Z (S) $3803
1926.503 A01
- Issued
- Mar 17, 2017
- Abate by
- Apr 19, 2017
- Penalty
- Initial $2,716 · Current $1,640 Reduced
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards: Location: entire site On or about: 3/2/17 a) Employees, exposed to fall hazards while engaged in residential carpentry, were not provided with fall protection training. NOTE: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
- · I (S) $1640
- · Z (S) $2716
1926.1060 A
- Issued
- Mar 17, 2017
- Abate by
- Apr 19, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1060(a): The employer did not provide a training program for each employee using ladders and stairways, as necessary. The program shall enable each employee to recognize hazards related to ladders and stairways, and shall train each employee in the procedures to be followed to minimize these hazards: Location: entire site On or about: 3/2/17 a) An employee was using a ladder while engaged in residential carpentry. The employee was not provided with ladder safety training. NOTE: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1926.1053 B13
- Issued
- Mar 17, 2017
- Penalty
- Initial $2,173 · Current $1,310 Reduced
General-duty citation text
29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step: Location: near dumpster On or about: 3/2/17 a) An employee was standing on the top cap of a portable A-frame ladder while engaged in residential carpentry. NOTE: Because abatement of this violation is already documented in the inspection casefile, the employer need not submit certification or documentation of abatement for this violation as normally required by 29 CFR 1903.19.
Recent events (2)
- · I (S) $1310
- · Z (S) $2173
More inspections at Specific Contracting, INC.
View Specific Contracting, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 342149408.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.