FESTUS, MO —
OSHA Inspection: CROWN PLASTICS
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of CROWN PLASTICS in 918 AIRPORT ROAD, FESTUS, MO 63028 (NAICS 326199). OSHA activity number 342153871.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CROWN PLASTICS
- Site address
- 918 AIRPORT ROAD
- City
- FESTUS
- State
- MO
- ZIP
- 63028
- Mailing
- 918 AIRPORT ROAD, FESTUS, MO 63028
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- Employees
- 25
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 II
- Issued
- Mar 17, 2017
- Abate by
- Apr 12, 2017
- Penalty
- Initial $5,387 · Current $2,694 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii): The energy control procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, including, but not limited to Items of this section: Lockout procedures were not developed for the global mattic machine. (Note: the machine was powered by electric and air energy.) Abatement documentation is required for this violation.
Recent events (2)
- — I (S) $2693.5
- — Z (S) $5387
1910.147 C05 I
- Issued
- Mar 17, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(5)(i): Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware were not provided by the employer for isolating, securing or blocking of machines or equipment from energy sources: Lockout device was not provided for isolating quick disconnect air hoses, such as, but not limited to, on the German Router and GBM machines.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 I B
- Issued
- Mar 17, 2017
- Abate by
- Apr 12, 2017
- Penalty
- Initial $8,873 · Current $4,437 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(B): Affected employees were not instructed in the purpose and use of the energy control procedure: Affected employees, such as those that operated machines and unplugged machines to change blades, did not receive lockout/tagout affected employee training. (Note: Affected employees are prohibited from performing lockout/tagout procedures. Affected employee training would require training on purpose and use of lockout procedures. Cord and plug equipment is exempt from lockout procedures only if the equipment is unplugged before servicing, otherwise lockout applies including authorization.) Abatement documentation is required for this violation.
Recent events (2)
- — I (S) $4436.5
- — Z (S) $8873
1910.147 D03
- Issued
- Mar 17, 2017
- Abate by
- Apr 12, 2017
- Penalty
- Initial $8,873 · Current $4,437 Reduced
General-duty citation text
29 CFR 1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment were not physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s): During servicing of the global mattic machine, the electrical cord was not unplugged before lifting the cover and reaching into the hazardous area. Abatement documentation is required for this violation.
Recent events (2)
- — I (S) $4436.5
- — Z (S) $8873
More inspections at Crown Plastics
View Crown Plastics's full OSHA safety record →
More inspections in this industry (NAICS 326199)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342153871.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.