ARLINGTON, TX ·
OSHA Inspection: ANGEL LIMON
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ANGEL LIMON in 4205 SNOW GOOSE, ARLINGTON, TX 76005 (NAICS 238130). OSHA activity number 342161239.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ANGEL LIMON
- Site address
- 4205 SNOW GOOSE
- City
- ARLINGTON
- State
- TX
- ZIP
- 76005
- Mailing
- 1125 BRADY DRIVE, IRVING, TX 75061
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 10
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.102 A01
- Issued
- Apr 13, 2017
- Abate by
- May 11, 2017
- Penalty
- Initial $2,173 · Current $2,173
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents. At the jobsite, employees operating Hitachi nail guns while performing framing activities were not wearing eye protection, exposing employees to the hazard of being struck by flying objects.
Recent events (1)
- · Z (S) $2173
1926.307 D01
- Issued
- Apr 13, 2017
- Abate by
- May 11, 2017
- Penalty
- Initial $3,803 · Current $3,803
General-duty citation text
29 CFR 1926.307(d)(1): Pulley(s) with part(s) seven feet (2.128 m) or less from the floor or work platform were not guarded in accordance with the requirements specified in paragraphs (m) and (o) of this section: At the jobsite, no guards were provided over the 6" and 12" pulleys to the compressor, exposing employees to the hazard of being struck by the belts and pulleys.
Recent events (1)
- · Z (S) $3803
1926.307 E01 I
- Issued
- Apr 13, 2017
- Abate by
- May 11, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.307(e)(1)(i): Horizontal belts which had both runs 7 feet (2.128 m) or less from the floor level were not guarded with a guard that extended to at least 15 inches (38.1 cm) above the belt or to a standard height specified in Table O-12: At the jobsite, no guards were provided over the 1/2" belts to the compressor, exposing employees to the hazard of being struck by the belts and pulleys.
Recent events (1)
- · Z (S) $0
1926.501 B13
- Issued
- Apr 13, 2017
- Abate by
- May 11, 2017
- Penalty
- Initial $3,803 · Current $3,803
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system. At the jobsite, employees engaged in framing activities at a height of over 6 feet were not protected by a fall arrest system. Employees were exposed to an unprotected fall of over 20 feet to the ground below.
Recent events (1)
- · Z (S) $3803
More inspections in this industry (NAICS 238130)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342161239.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.