Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,198,201Inspections Most recent open 2026-08-31 Last loaded 2026-09-03

OSHA Inspection: SO MASONRY LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of SO MASONRY LLC in 7821 ALCOA ROAD, BENTON, AR 72019 (NAICS 238140). OSHA activity number 342161767.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch SO Masonry LLC for free Get an email when a new federal OSHA severe-injury report for SO Masonry LLC is published. One employer, no account, unsubscribe in one click.
Establishment
SO MASONRY LLC
Site address
7821 ALCOA ROAD
City
BENTON
State
AR
ZIP
72019
Mailing
4004 HURRICANE SHORES DRIVE, BENTON, AR 72019
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
4
Ownership type
Private (A)

5 citations on file for this inspection.

1926.100 A

Serious Gravity 5 1 instance 2 exposed
Issued
Apr 12, 2017
Abate by
May 3, 2017
Penalty
Initial $2,716 · Current $1,000 Reduced
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:        On or about March 9, 2017 and times prior thereto, at the jobsite, the employer did not ensure that employees who worked below overhead work wore head protection against falling objects.
Recent events (2)
  • · I (S) $1000
  • · Z (S) $2716

1926.451 C02 IV

Serious Gravity 10 1 instance 3 exposed
Issued
Apr 12, 2017
Abate by
Apr 26, 2017
Penalty
Initial $3,803 · Current $1,000 Reduced
29 CFR 1926.451(c)(2)(iv): Front-end loaders and similar pieces of equipment were used to support scaffold platforms when they were not specifically designed by the manufacturer for such use:     On or about March 9, 2017 and times prior thereto, at the jobsite, employees were exposed to a greater than 10 ft. fall hazard while working from a wooden pallet elevated on the forks of a Sky Trak 6036 telescopic forklift without approval from the manufacturer.
Recent events (2)
  • · I (S) $1000
  • · Z (S) $3803

1926.451 C02 V

Serious Gravity 10 1 instance 3 exposed
Issued
Apr 12, 2017
Abate by
Apr 26, 2017
Penalty
Initial $0 · Current $0
29 CFR 1926.451(c)(2)(v): Fork-lifts were used to support scaffold platforms while the entire platform was not attached to the fork and the fork-lift was moved horizontally while the platform was occupied:  On or about March 9, 2017 and times prior thereto, at the jobsite, employees were exposed to a greater than 10 ft. fall hazard while working from an elevated wooden pallet that was not secured to the forks of a Sky Trak 6036 telescopic forklift.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1926.451 G01

Serious Gravity 10 1 instance 3 exposed
Issued
Apr 12, 2017
Abate by
May 3, 2017
Penalty
Initial $0 · Current $0
29 CFR 1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section:  On or about March 9, 2017 and times prior thereto, the employer did not ensure each person engaged in measuring control joints on the exterior brick walls of the building was protected from falling 19 ft. from a wooden pallet on the elevated forks of a Sky Trak 6036 Telescopic forklift.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.1200 H01

Other-than-serious 1 instance 3 exposed
Issued
Apr 12, 2017
Abate by
Apr 26, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: (Construction Reference: 1926.59):  On or about March 9, 2017, and times prior thereto, at the job site, the employer did not ensure that employees exposed to the hazards of silica and dust particles, while sawcutting brick and pouring bags of cement, were provided effective information and training on hazardous chemicals in their work area at the time of their initial training. This condition exposed employee(s) to inhalation hazards associated with exposure to airborne silica and dust particles.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 342161767.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.