PATERSON, NJ —
OSHA Inspection: TEC INSTALLATIONS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of TEC INSTALLATIONS, INC. in 375 E 22ND ST, PATERSON, NJ 07514 (NAICS 333922). OSHA activity number 342178910.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TEC INSTALLATIONS, INC.
- Site address
- 375 E 22ND ST
- City
- PATERSON
- State
- NJ
- ZIP
- 07514
- Mailing
- 375 E 22ND ST, PATERSON, NJ 07514
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333922
- Employees
- 14
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.178 O01
- Issued
- Jun 21, 2017
- Penalty
- Initial $5,070 · Current $2,789 Reduced
General-duty citation text
29 CFR 1910.178(o)(1): The employer did not ensure that only stable or safely arranged loads were handled: (a) Workshop: The employer did not ensure that the load handled by the forklift was stable. Metal grating handled by forklift was unstable, on or about March 16th 2017. There is no abatement certification or documentation required for this item.
Recent events (2)
- — I (S) $2788.5
- — Z (S) $5070
1910.178 L01 I
- Issued
- Jun 21, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): (a) Workshop: The employer did not ensure that the operators of the four different powered industrial trucks had successfully completed training on the safe operation of a powered industrial truck, on or about March 16th 2017. There is no abatement certification or documentation required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 M05 I
- Issued
- Jun 21, 2017
- Penalty
- Initial $2,173 · Current $1,195 Reduced
General-duty citation text
29 CFR 1910.178(m)(5)(i): When a powered industrial truck is left unattended, load engaging means were not fully lowered: (a) Workshop: A Clark powered industrial truck was left unattended with a load resting on the forks that were not fully lowered, on or about March 16th 2017. There is no abatement certification or documentation required for this item.
Recent events (2)
- — I (S) $1195
- — Z (S) $2173
1910.110 E04 III
- Issued
- Jun 21, 2017
- Abate by
- Jul 18, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.110(e)(4)(iii): Permanent and removable fuel containers were not securely mounted to prevent jarring loose, slipping, or rotating: (a) Workshop: The locating pins on the Yale and Clark powered industrial trucks were missing/inadequate; thus allowing the cylinders to come loose and/or rotate during operation, on or about March 16th 2017. Abatement certification is required for this item in accordance with the requirements of 29 CFR 1903.19(c)
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.252 B02 III
- Issued
- Jun 21, 2017
- Penalty
- Initial $5,070 · Current $2,788 Reduced
General-duty citation text
29 CFR 1910.252(b)(2)(iii): Workers and other persons adjacent to the welding area were not protected from the rays by noncombustible or flameproof screens or shields: (a). Workshop: Workers located in the direct vicinity of welding work were not protected from the rays by noncombustible screens, on or about March 16th 2017. There is no abatement certification or documentation required for this item.
Recent events (2)
- — I (S) $2788
- — Z (S) $5070
1910.305 B01 II
- Issued
- Jun 21, 2017
- Penalty
- Initial $5,070 · Current $2,789 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: (a). Workshop: The electric panel in the workshop had unused opening that were not effectively closed, on or about March 16th 2017. There is no abatement certification or documentation required for this item.
Recent events (2)
- — I (S) $2788.5
- — Z (S) $5070
1910.303 F02
- Issued
- Jun 21, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: (a). Workshop: The employer failed to ensure that all circuit breakers in the panel located in the workshop were labeled properly indicating their purpose, on or about March 16th 2017. There is no abatement certification or documentation required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at TEC Installations, INC.
View TEC Installations, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333922)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342178910.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.