OSHA Inspection: R & J STEEL ERECTORS, LLC

Issued

Jun 30, 2017

Abate by

Jul 7, 2017

Penalty

Initial $7,985 · Current $7,985

General-duty citation text

29 CFR 1926.760(a)(1): Each employee engaged in a steel erection activity who is on a walking/working surface with an unprotected side or edge more than 15 feet (4.6 m) above a lower level was not protected from fall hazards by guardrail systems, safety net systems, personal fall arrest systems, positioning device systems, or fall restraint systems:  a) Building 10, Vault 11 - An ironworker had finished grinding out the top weld on a steel beam connection and was exposed to an 18 foot, 1 inch fall hazard, on or about 03/11/2017.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet), in addition, documentation demonstrating the abatement is complete must be included with your certification.  This documentation may include, but is not limited to evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Jun 30, 2017

Abate by

Jul 13, 2017

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.761(b): The employer did not train each employee exposed to a fall hazard in accordance with the requirements of 29 CFR 1926.761:  a) Building 10, Vault 11 Mezzanine - An employee acting as a fire watch during a steel beam connection grinding operation was not provided with fall protection training as evidenced by the employee being exposed to an 18 foot, 1 inch fall hazard while performing duties, on or about, 03/11/2017.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet).

Issued

Jun 30, 2017

Abate by

Jul 7, 2017

Penalty

Initial $1,811 · Current $1,811

General-duty citation text

29 CFR 1904.29(b)(1): A Log of all recordable work-related injuries and illnesses (OSHA Form 300 or equivalent) was not completed in the detail as required by the regulation:  a) Company - The type of injury and the object/substance that caused the injury were not documented in column F in the 2017 OSHA 300 log for incident number 1, on or about 05/04/2017.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet).

Issued

Jun 30, 2017

Abate by

Jul 7, 2017

Penalty

Initial $1,811 · Current $1,811

General-duty citation text

29 CFR 1904.29(b)(2): The employer did not fill out or correctly fill out an OSHA Form 301 or equivalent for each recordable injury or illness:  a) Company - The OSHA form 301 for an incident that occurred on 03/11/2017 was not completely filled out, including but not limited to sections; 2, 3, 4, 6, 7, 10, 12, 13, 14, 15, 16, 17, and 18 on or about 03/17/2017.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet).