BRIDGEPORT, PA —
OSHA Inspection: 416 JOHNSON PROPERTIES, LTD.
Unprogrammed Related inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Related safety inspection of 416 JOHNSON PROPERTIES, LTD. in 416 DEPOT ST., BRIDGEPORT, PA 19405 (NAICS 541513). OSHA activity number 342183894.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- 416 JOHNSON PROPERTIES, LTD.
- Site address
- 416 DEPOT ST.
- City
- BRIDGEPORT
- State
- PA
- ZIP
- 19405
- Mailing
- 416 DEPOT ST., BRIDGEPORT, PA 19405
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 541513
- Employees
- 13
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.212 A01
- Issued
- Mar 28, 2017
- Penalty
- Initial $3,622 · Current $2,712 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, and flying chips. a) Maintenance Shop Work Area: On or about January 12, 2017, an employee operated a Wells Metal Horizontal Band Saw which had approximately six inches of its unused portion of blade that was not guarded to prevent accident contact.
Recent events (2)
- — I (S) $2712
- — Z (S) $3622
1910.219 D01
- Issued
- Mar 28, 2017
- Penalty
- Initial $2,897 · Current $1,988 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o). a) Maintenance Shop Work Area: On or about January 12, 2017, an employee used a Belt Sander Machine which was driven by an unguarded pulley, which was located less than seven (7) feet above the floor or working platform.
Recent events (2)
- — I (S) $1988
- — Z (S) $2897
1910.219 E04
- Issued
- Mar 28, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(4): Vertical belts. Vertical belts running over a lower pulley more than seven (7) feet above floor or platform shall be guarded at the bottom in the same manner as horizontal overhead belts, if conditions are as stated in paragraphs (e)(2)(ii) (a) and (c) of this section. a) Maintenance Shop Work Area: On or about January 12, 2017, an employee used a Belt Sander Machine which was driven by an unguarded incline belt, which was located less than seven (7) feet above the floor or working platform.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at 416 Johnson Properties, LTD.
View 416 Johnson Properties, LTD.'s full OSHA safety record →
More inspections in this industry (NAICS 541513)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342183894.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.