SUNRISE, FL —
OSHA Inspection: FANATICS MOUNTED MEMORIES, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of FANATICS MOUNTED MEMORIES, INC. in 251 INTERNATIONAL PARKWAY, SUNRISE, FL 33325 (NAICS 451110). OSHA activity number 342194826.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FANATICS MOUNTED MEMORIES, INC.
- Site address
- 251 INTERNATIONAL PARKWAY
- City
- SUNRISE
- State
- FL
- ZIP
- 33325
- Mailing
- 8100 NATIONS WAY ATTN: COURTNEY THOMPSON, JACKSONVILLE, FL 32256
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 451110
- Employees
- 150
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A03 II
- Issued
- May 23, 2017
- Penalty
- Initial $29,876 · Current $14,938 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a. On or about March 22, 2017, at the machine shop area of the above addressed jobsite, an employee was exposed to a caught by hazard while working with a drill press (i.e. Buffalo Forge Co., No. 18) no other info available) that lacked a guard on its point of operation. b. On or about March 22, 2017, at the machine shop area of the above addressed jobsite, an employee was exposed to a caught by hazard while working with a drill press (i.e. Ryobi, Serial #C032811940) that lacked a guard on its point of operation. c. On or about March 22, 2017, at the machine shop area of the above addressed jobsite, an employee was exposed to a caught by hazard while working with a drill press (i.e. Ryobi, Serial #AZ053331203) that lacked a guard on its point of operation. d. On or about March 22, 2017, at the machine shop area of the above addressed jobsite, an employee was exposed to a caught by hazard while working with a drill press (i.e. Ryobi, C024424215) that lacked a guard on its point of operation. Fanatics Mounted Memories Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard, which was contained in OSHA inspection number 1074305, citation number 1, item number 1 and was affirmed as a final order on 11/24/2015, with respect to a workplace located at 251 International Parkway, Sunrise, FL 33325.
Recent events (2)
- — I (R) $14938
- — Z (R) $29876
1910.219 D01
- Issued
- May 23, 2017
- Penalty
- Initial $5,975 · Current $2,988 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): On or about March 22, 2017, at the machine shop area of the above addressed jobsite, an employee was exposed to a caught by hazard while working with a drill press (i.e. Buffalo Forge Co., No. 18) that had unguarded belt and pulleys on its drive mechanism.
Recent events (2)
- — I (S) $2987.5
- — Z (S) $5975
1910.219 E01 I
- Issued
- May 23, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt: On or about March 22, 2017, at the machine shop area of the above addressed jobsite, an employee was exposed to a caught by hazard while working with a drill press (i.e. Buffalo Forge Co., No. 18) that had unguarded belt and pulleys on its drive mechanism.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 B
- Issued
- May 23, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: On or about March 22, 2017, at the machine shop area of the above addressed jobsite, an employee was exposed to a struck by hazard while working with a drill press (i.e. Buffalo Forge Co., No. 18) which was not anchored to prevent walking or moving.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.213 A13
- Issued
- May 23, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(a)(13): Revolving double arbor saws were not fully guarded in accordance with all the requirements for circular crosscut saws or with all the requirements for circular ripsaws, according to the kind of saws mounted on the arbors: On or about March 22, 2017, at the machine shop area of the above addressed, the side acrylic guards for a double mitre saw (Prisma CE, Serial Number 505G) were not installed and/or adjusted so as to minimize operator's exposure to the blades, exposing an employee to a caught by hazard.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Fanatics Mounted Memories, INC.
View Fanatics Mounted Memories, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 451110)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342194826.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.