SAN ANTONIO, TX —
OSHA Inspection: TEXAS DIP MOLDING & COATING INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of TEXAS DIP MOLDING & COATING INC. in 12778 O'CONNOR RD, SAN ANTONIO, TX 78233 (NAICS 326199). OSHA activity number 342195815.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TEXAS DIP MOLDING & COATING INC.
- Site address
- 12778 O'CONNOR RD
- City
- SAN ANTONIO
- State
- TX
- ZIP
- 78233
- Mailing
- 12778 O'CONNOR RD, SAN ANTONIO, TX 78233
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- Employees
- 12
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.132 A
- Issued
- Jun 30, 2017
- Abate by
- Jul 17, 2017
- Penalty
- Initial $3,622 · Current $1,700 Reduced
General-duty citation text
29 CFR 1910.132(a): Protective equipment was not used when necessary whenever hazards capable of causing injury and impairment were encountered: Production Area: On or about March 23, 2017, and times prior thereto, employees were exposed to hot surface hazards while working in close quarters near exposed heated racks on the Texas #1 machine, and adequate personal protective equipment to prevent dermal burns was not provided.
Recent events (2)
- — I (S) $1700
- — Z (S) $3622
1910.212 B
- Issued
- Jun 30, 2017
- Penalty
- Initial $2,173 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: Storage Room: On or about March 23, 2017, and times prior thereto, employees were exposed to struck-by and caught-in hazards from the use of a Porter Cable Drill Press (Model: PCXB620DP, SN: 008657) which was used to drill lead bars and was not anchored to a fixed location.
Recent events (2)
- — I (S) $1000
- — Z (S) $2173
1910.1025 H01
- Issued
- Jun 30, 2017
- Abate by
- Jul 17, 2017
- Penalty
- Initial $2,897 · Current $0 Reduced
1591BWPB
General-duty citation text
29 CFR 1910.1025(h)(1): All surfaces were not maintained as free as practicable of accumulations of lead: Storage Room: On or about March 28, 2017, employees were exposed to health hazards from the accumulation of lead on drill press surfaces in the storage room which was accessed and used by employees.
Recent events (2)
- — I (S) $0
- — Z (S) $2897
1910.1200 E01
- Issued
- Jun 30, 2017
- Abate by
- Jul 26, 2017
- Penalty
- Initial $2,897 · Current $1,300 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: Warehouse: On or about March 23, 2017, and times prior there to, the employer did not implement or maintain an effective written Hazard Communication Program to train and inform employee(s) and temporary employees who handle, use, transport or are potentially exposed to hazards from chemicals and other hazardous materials, such as but not limited to, Silicone protective coatings (Solvent Naphtha), Vinyl Coatings, Xylene, chemical ink solvent (Naphtha, Cyclohexanone), Compressed gases (Nitrogen), and Lead.
Recent events (2)
- — I (S) $1300
- — Z (S) $2897
1910.303 G01 I A
- Issued
- Jun 30, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1)(i)(A): Working space about electric equipment rated 600 volts, nominal, or less was not provided with the minimal depth in the direction of access to live parts as indicated in Table S-1: Production Area, Rear: On or about March 23, 2017, employee(s) were exposed to a fire hazard from a blocked electrical panel, which as obstructed by the storage of insulation boards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Texas DIP Molding & Coating INC.
View Texas DIP Molding & Coating INC.'s full OSHA safety record →
More inspections in this industry (NAICS 326199)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342195815.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.