Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: MARTINEZ VINYL SIDING, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of MARTINEZ VINYL SIDING, LLC in LOT #188 4606 WOODFORD CIRCLE, MC CALLA, AL 35111 (NAICS 238170). OSHA activity number 342209657.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Martinez Vinyl Siding, LLC — free Get an email when a new federal OSHA severe-injury report for Martinez Vinyl Siding, LLC is published. One employer, no account, unsubscribe in one click.
Site address
LOT #188 4606 WOODFORD CIRCLE
City
MC CALLA
State
AL
ZIP
35111
Mailing
P.O. BOX 1891, PELHAM, AL 35124
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238170
Employees
3
Ownership type
A

7 citations on file for this inspection.

1926.28 A

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 6, 2017
Abate by
Jun 30, 2017
Penalty
Initial $2,173 · Current $1,304 Reduced
29 CFR 1926.28(a): Appropriate personal protective equipment was not worn by employee(s) in all operations where there was exposure to hazardous conditions:    (a) On or about 3/21/2017 - Lot #188, 4606 Woodford Circle, McCalla, AL, employees using pneumatic nail guns to install fascia were not wearing eye protection.
Recent events (2)
  • — I (S) $1303.8
  • — Z (S) $2173

1926.304 D

Serious Gravity 5 1 instance 1 exposed
Issued
Jun 6, 2017
Abate by
Jun 16, 2017
Penalty
Initial $2,173 · Current $1,304 Reduced
29 CFR 1926.304(d): Portable, power-driven circular saw(s) were not equipped with a guard above and below the base plate or shoe:    (a) On or about 3/21/2017 - Lot #188, 4606 Woodford Circle, McCalla, AL, a Makita circular saw had the bottom guard shimmed to prevent it from moving back into place to cover the blade after cutting material.
Recent events (2)
  • — I (S) $1303.8
  • — Z (S) $2173

1926.501 B13

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 6, 2017
Abate by
Jun 16, 2017
Penalty
Initial $3,259 · Current $1,955 Reduced
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):     (a) On or about 3/21/2017 - Lot #188, 4606 Woodford Circle, McCalla, AL, two employees standing on the porch roof overhang while installing fascia were exposed to falls of approximately 9 to 10 feet.
Recent events (2)
  • — I (S) $1955.4
  • — Z (S) $3259

1926.503 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 6, 2017
Abate by
Jun 16, 2017
Penalty
Initial $0 · Current $0
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  (a) On or about 3/21/2017 - Lot #188, 4606 Woodford Circle, McCalla, AL, employees installing fascia and siding had not been trained in fall protection systems.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1053 B01

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 6, 2017
Abate by
Jun 16, 2017
Penalty
Initial $2,173 · Current $1,304 Reduced
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:    (a) On or about 3/21/2017 - Lot #188, 4606 Woodford Circle, McCalla, AL, a ladder that was used for accessing the upper front porch roof was only extended approximately 2 ½ feet above the landing exposing the employees to falls of approximately 9 to 10 feet.
Recent events (2)
  • — I (S) $1303.8
  • — Z (S) $2173

1926.1053 B04

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 6, 2017
Abate by
Jun 23, 2017
Penalty
Initial $0 · Current $0
29 CFR 1926.1053(b)(4): Ladder(s) were used for purposes other than the purpose for which they were designed:  (a) On or about 3/21/2017 - Lot #188, 4606 Woodford Circle, McCalla, AL, employees installing fascia and siding on the second floor of a single family home were standing on two closed A-Frame ladders leaned up against the porch wall overhang exposing them to falls of approximately 9 to 10 feet.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.1060 A

Serious Gravity 5 1 instance 2 exposed
Issued
Jun 6, 2017
Abate by
Jun 16, 2017
Penalty
Initial $0 · Current $0
29 CFR 1926.1060(a): The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would enable each employee to recognize hazards related to ladders and stairways and train each employee in the procedures to be followed to minimize these hazards:  (a) On or about 3/21/2017 - Lot #188, 4606 Woodford Circle, McCalla, AL, employees using ladders to access the roof and install fascia and siding had not been trained.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Martinez Vinyl Siding, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342209657.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.