Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,191,473Inspections Most recent open 2026-07-28 Last loaded 2026-07-31

OSHA Inspection: BUREAU OF RECLAMATION/LOWER COLORADO REGION

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of BUREAU OF RECLAMATION/LOWER COLORADO REGION in YUMA AREA OFFICE 7301 CALLE AGUA SALADA, YUMA, AZ 85364 (NAICS 924110). OSHA activity number 342211315.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Bureau of Reclamation/Lower Colorado Region — free Get an email when a new federal OSHA severe-injury report for Bureau of Reclamation/Lower Colorado Region is published. One employer, no account, unsubscribe in one click.
Site address
YUMA AREA OFFICE 7301 CALLE AGUA SALADA
City
YUMA
State
AZ
ZIP
85364
Mailing
YUMA AREA OFFICE 7301 CALLE AGUA SALADA, YUMA, AZ 85364
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
924110
Employees
147
Ownership type
D

3 citations on file for this inspection.

1910.179 J03

Serious Gravity 5 1 instance 6 exposed
Issued
May 23, 2017
Abate by
Jun 19, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.179(j)(3): A complete periodic inspection of crane(s) had not been conducted in the past 12 months:  Equipment Maintenance Shop: A complete periodic inspection of the Agutter 3-ton overhead crane had not been conducted in the last 12 months.
Recent events (1)
  • — Z (S) $0

1910.212 A01

Serious Gravity 5 4 instances 6 exposed
Issued
May 23, 2017
Abate by
Jun 19, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a) Maintenance Shop: The rotating chuck of the Rockwell EFI-1 drill press (Bureau sticker #0043318) was not guarded. Employees were exposed to the rotating chuck and swarf that is produced by the drill bit.  b) Maintenance Shop: The rotating chuck of the Lagun FU2-LAC milling machine was not guarded. Employees were exposed to the rotating chuck and swarf that is produced by the drill bit.  c) Maintenance Shop: The rotating chuck of the International drill press (Bureau sticker #0043320) was not guarded. Employees were exposed to the rotating chuck and swarf that is produced by the drill bit.  d) Maintenance Shop: The rotating chuck of the Delta drill press (Bureau sticker #0166417) was not guarded. Employees were exposed to the rotating chuck and swarf that is produced by the drill bit.
Recent events (1)
  • — Z (S) $0

1910.1200 F06 II

Other-than-serious 1 instance 6 exposed
Issued
May 23, 2017
Abate by
Jun 19, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(f)(6)(ii): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals and which, in conjunction with the other information immediately available to employees under the hazard communication program, would provide employees with the specific information regarding the physical and health hazards of the hazardous chemical:  Maintenance Shop: The "Pure Wash Systems" parts cleaner did not have a label to identify the solvent used in the cleaning process and the hazards of the chemical.
Recent events (1)
  • — Z (O) $0

View Bureau of Reclamation/Lower Colorado Region's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342211315.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.