Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CONNECTIVITY SOLUTIONS, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of CONNECTIVITY SOLUTIONS, INC. in 1201 BROAD ROCK BLVD, RICHMOND, VA 23249 (NAICS 238210). OSHA activity number 342213782.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Connectivity Solutions, INC. — free Get an email when a new federal OSHA severe-injury report for Connectivity Solutions, INC. is published. One employer, no account, unsubscribe in one click.
Site address
1201 BROAD ROCK BLVD
City
RICHMOND
State
VA
ZIP
23249
Mailing
103 A CARPENTER DR., STERLING, VA 20164
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238210
Employees
2
Ownership type
A

3 citations on file for this inspection.

1910.28 B13 I

Serious Gravity 5 1 instance 2 exposed
Issued
May 4, 2017
Abate by
May 31, 2017
Penalty
Initial $6,338 · Current $4,000 Reduced
29 CFR 1910.28(b)(13)(i): When work was performed less than 6 feet (1.6 m) from the roof edge, the employer did not ensure each employee was protected from falling by a guardrail system, safety net system, travel restraint system, or personal fall arrest system:    a) 1201 Broad Rock Blvd., Building 500 penthouse, Richmond, VA 23249: On or about March 29, 2017, and times prior thereto, each employee that performed work while on a low-slope penthouse roof within 6' from the roof edge, with an up to approximately 9'5" eave to lower level fall distance was not protected from fall hazards by the use of guardrails, safety nets or personal fall arrest systems.    Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $4000
  • — Z (S) $6338

1910.28 B13 III B

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
May 4, 2017
Abate by
May 31, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.28(b)(13)(iii)(B): The employer did not implement and enforce a work rule prohibiting employees from going within 15 feet (4.6 m) of the roof edge without using fall protection in accordance with paragraphs (b)(13)(i) and (b)(13)(ii):  a) 1201 Broad Rock Blvd., Building 500, Richmond, VA 23249: On or about March 29, 2017, and times prior thereto, the employer did not implement and enforce a work rule prohibiting each employee that accessed the penthouse level from the low-slope Building 500 roof with an up to approximately 100' eave to ground or lower level fall distance, from going within 15 feet of the Building 500 roof edge.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1904.40 A

Deleted Other-than-serious 1 instance 37 exposed
Issued
May 4, 2017
Abate by
May 31, 2017
Penalty
Initial $1,268 · Current $0 Reduced
29 CFR 1904.40(a): The employer did not provide an authorized government representative the records within the four business hours:  a) 1201 Broad Rock Blvd., Building 500, Richmond, VA 23249: The OSHA 300 Logs for 2016 and 2017, and OSHA 300A Summary for 2016 were requested on April 7, 2017, and received on April 28, 2017.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • — I (O) $0
  • — Z (O) $1268

View Connectivity Solutions, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342213782.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.