WADSWORTH, OH ·
OSHA Inspection: QUALITY REPRODUCTIONS, INC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of QUALITY REPRODUCTIONS, INC in 127 HARTMAN ROAD, WADSWORTH, OH 44281 (NAICS 423120). OSHA activity number 342217882.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- QUALITY REPRODUCTIONS, INC
- Site address
- 127 HARTMAN ROAD
- City
- WADSWORTH
- State
- OH
- ZIP
- 44281
- Mailing
- 127 HARTMAN ROAD, WADSWORTH, OH 44281
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423120
- Employees
- 22
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1910.178 L01 II
- Issued
- Apr 17, 2017
- Abate by
- May 31, 2017
- Penalty
- Initial $4,346 · Current $2,475 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(ii): Prior to permitting an employee to operate a powered industrial truck (except for training purposes), the employer shall ensure that each operator has successfully completed the training required by this paragraph (l), except as permitted by paragraph (l)(5). On or about March 24, 2017, the employer did not ensure employees operating a Mitsubishi, Model FCC30, powered industrial truck (forklift) had successfully completed powered industrial truck safe operation training.
Recent events (2)
- · I (S) $2475
- · Z (S) $4346
1926.451 A06
- Issued
- Apr 17, 2017
- Penalty
- Initial $4,346 · Current $2,475 Reduced
General-duty citation text
29 CFR 1926.451(a)(6): Scaffolds shall be designed by a qualified person and shall be constructed and loaded in accordance with that design. Non-mandatory Appendix A to this subpart contains examples of criteria that will enable an employer to comply with paragraph (a) of this section. **Note: 1910.27(a): Scaffolds. Scaffolds used in general industry must meet the requirements in 29 CFR part 1926, subpart L (Scaffolds). On or about March 24, 2017, the employer did not ensure a scaffold work platform placed on the forks of a Mitsubishi, Model FCC30, powered industrial truck (forklift) was designed a person qualified in scaffold construction and design.
Recent events (2)
- · I (S) $2475
- · Z (S) $4346
1926.451 C02 IV
- Issued
- Apr 17, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(c)(2)(iv): Front-end loaders and similar pieces of equipment shall not be used to support scaffold platforms unless they have been specifically designed by the manufacturer for such use. **Note: 1910.27(a): Scaffolds. Scaffolds used in general industry must meet the requirements in 29 CFR part 1926, subpart L (Scaffolds). On or about March 24, 2017, the employer did not ensure a Mitsubishi, Model FCC30, powered industrial truck (forklift) was designed by the manufacturer to support a scaffold work platform used to raise an employee to change light bulbs located in the facility ceiling.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1926.451 C02 V
- Issued
- Apr 17, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(c)(2)(v): Fork-lifts shall not be used to support scaffold platforms unless the entire platform is attached to the fork and the fork-lift is not moved horizontally while the platform is occupied. 29 CFR 1926.451(c)(2)(v): Fork-lifts shall not be used to support scaffold platforms unless the entire platform is attached to the fork and the fork-lift is not moved horizontally while the platform is occupied.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.157 G02
- Issued
- Apr 17, 2017
- Abate by
- May 31, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(g)(2): The employer shall provide the education required in paragraph (g)(1) of this section upon initial employment and at least annually thereafter. On or about March 24, 2017, the employer did not provide employees with training upon their initial assignment on the procedures and use of portable fire extinguishers, or in lieu of the use of portable fire extinguishers trained employees on a fire prevention/emergency evacuation program.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections in this industry (NAICS 423120)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 342217882.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.