HAMILTON, MT —
OSHA Inspection: MILDENBERGER MOTORS INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MILDENBERGER MOTORS INC in 1717 N. 1ST ST, HAMILTON, MT 59840 (NAICS 441110). OSHA activity number 342222494.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MILDENBERGER MOTORS INC
- Site address
- 1717 N. 1ST ST
- City
- HAMILTON
- State
- MT
- ZIP
- 59840
- Mailing
- P.O. BOX 630, HAMILTON, MT 59840
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 441110
- Employees
- 11
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.212 A01
- Issued
- Aug 3, 2017
- Abate by
- Aug 29, 2017
- Penalty
- Initial $2,897 · Current $1,449 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Mildenberger Motors Shop, West Wall: On April 4, 2017 and at times prior employees were exposed to struck by hazards while working in and around the unguarded Sunex Tools (Model: 5240A040) Ton Air Over Hydraulic Press.
Recent events (2)
- — I (S) $1448.5
- — Z (S) $2897
1910.215 A04
- Issued
- Aug 3, 2017
- Abate by
- Aug 29, 2017
- Penalty
- Initial $1,847 · Current $924 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: a) Mildenberger Motors Shop, Southwest Wall, Dewalt Grinder: On April 4, 2017 and at times prior employees were exposed to caught in hazards while using a work rest adjusted to approximately 5/8 of an inch.
Recent events (2)
- — I (S) $923.5
- — Z (S) $1847
1910.215 B09
- Issued
- Aug 3, 2017
- Abate by
- Aug 29, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a) Mildenberger Motors Shop, Southwest Wall, Dewalt Grinder: On April 4, 2017 and at times prior employees were exposed to being struck by pieces of the abrasive wheel in the event of wheel fracture with the tongue guard being adjusted 1 inch from the abrasive wheel.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 B02
- Issued
- Aug 3, 2017
- Abate by
- Aug 29, 2017
- Penalty
- Initial $1,847 · Current $924 Reduced
General-duty citation text
29 CFR 1910.305(b)(2): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy: a) Mildenberger Motors Shop, East Wall Outlet: On April 4, 2017 and at times prior employees were exposed to electrical shock hazards associated with not having a faceplate on a wall outlet.
Recent events (2)
- — I (S) $923.5
- — Z (S) $1847
1910.305 G01 IV A
- Issued
- Aug 3, 2017
- Abate by
- Aug 29, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: a) Mildenberger Motors Shop, East wall time clock: On April 4, 2017 and at times prior employees were exposed to fire hazards associated with using a flexible extension cord as permanent fixed wiring.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.37 B02
- Issued
- Aug 3, 2017
- Abate by
- Aug 29, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit": a) Mildenberger Motors Shop, West wall storage room: On April 4, 2017 and at times prior the employer failed to ensure that all exits leading out of the facility were properly marked.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.303 G01 I
- Issued
- Aug 3, 2017
- Abate by
- Aug 29, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1)(i): Work space was less than 30 inches wide in front of electric equipment operating at 600 volts, nominal, or less: a) Mildenberger Motors Shop, South Wall near Bosch Brake Lathe: On April 4, 2017 and at times prior the employer failed to meet the minimum clearance requirements for the electrical breaker panel.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Mildenberger Motors INC
View Mildenberger Motors INC's full OSHA safety record →
More inspections in this industry (NAICS 441110)
More inspections in MT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342222494.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.