OSHA Inspection: BRIAN ROSSI

Issued

2017-08-17 00:00:00

Penalty

Initial $3803.00 · Current $3803.00

General-duty citation text

29 CFR 1926.102(a)(1): 1926.102(a)(1): Employees were not provided with eye and face protection equipment when machines or operations presented potential eye or face injury.   A) 76 Tappen St Avenel, NJ 07001  Employees operate  4-1/2 inch angle grinders to cut masonry stone without eye or face protection. Exposing employees to  eye and face injuries if struck by flying debris.  Hazard observed on or about 04/04/2017

Issued

2017-08-17 00:00:00

Penalty

Initial $3803.00 · Current $3803.00

General-duty citation text

29 CFR 1926.300(b)(1): When power operated tools are designed to accommodate guards, they shall be equipped with such guards when in use.   A) 76 Tappen St Avenel, NJ 07001  Employees operate 4 1/2 inch angle grinders with the guards removed. Exposing both parties to amputation hazards.  Hazard observed on or about 04/04/2017

Issued

2017-08-17 00:00:00

Penalty

Initial $3803.00 · Current $3803.00

General-duty citation text

29 CFR 1926.451(f)(6): Scaffolds was erected, used, dismantled, altered, or moved such that they or any conductive material handled on them might come closer than 3 ft to exposed and energized power lines.  a) 76 Tappen Street Avenel, NJ 07001  Employees work on and from timber scaffold that was wet from rain and erected in close proximity to energized power lines exposing them to electrical shock or electrocution.   Hazard observed on or about 04/04/2017

Issued

2017-08-17 00:00:00

Penalty

Initial $3803.00 · Current $3803.00

General-duty citation text

29 CFR 1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms.  a) 76 Tappen Street Avenel, NJ 07001  Employees were exposed to fall hazards of 14ft from the walking/working surface platform to the ground below. There were no guardrails installed along all open sides and ends of platform.   Hazard observed on or about 04/04/2017