NEW YORK, NY ·
OSHA Inspection: 315 94TH LLC
Programmed Related inspection · Safety discipline
At a glance
On , OSHA opened a programmed Related safety inspection of 315 94TH LLC in 315 WEST 94TH STREET, NEW YORK, NY 10014 (NAICS 236115). OSHA activity number 342231966.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- 315 94TH LLC
- Site address
- 315 WEST 94TH STREET
- City
- NEW YORK
- State
- NY
- ZIP
- 10014
- Mailing
- 315 WEST 94TH STREET, NEW YORK, NY 10014
What kind of inspection was it?
- Inspection type
- Programmed Related (I)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236115
- Employees
- 8
- Ownership type
- Private (A)
Citations
7 citations on file for this inspection.
1926.102 A01
- Issued
- May 31, 2017
- Penalty
- Initial $2,173 · Current $2,173
General-duty citation text
29 CFR 1926.102(a)(1): 29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation. a) 315 West 94th street, New York, NY: Employees were operating a Makita GA4030K 4-inch angle grinder to cut tiles without using proper eye protection exposing them to flying particles, on or about 03/31/17.
Recent events (1)
- · Z (S) $2173
1926.405 G02 IV
- Issued
- May 31, 2017
- Penalty
- Initial $2,716 · Current $2,716
General-duty citation text
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws: a) 315 West 94th street, New York, NY: Employees were using a Makita GA4030K 4-inch angle grinder with a flexible cord without strain relief, on or about 03/31/17.
Recent events (1)
- · Z (S) $2716
1926.1053 B04
- Issued
- May 31, 2017
- Penalty
- Initial $3,259 · Current $3,259
General-duty citation text
29 CFR 1926.1053(b)(4): Ladders were used for purposes other than the purposes for which they were designed: a) 315 West 94th street, New York, NY: An employee utilized a folded A-Frame Ladder when conducting overhead work with a power hand-tool; there-by annulling the ladders designed purpose, on or about 03/31/17.
Recent events (1)
- · Z (S) $3259
1910.134 C02 I
- Issued
- May 31, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c)(2)(i): Respirator users were not provided with the information contained in Appendix D to 29 CFR 1910.134 when the employer determined that any voluntary respirator use was permissible: (Construction Reference 1926.103) a) 315 West 94th street, New York, NY: Employees were using N95 respirators voluntarily while performing tile work but were not provided with Appendix D, on or about 03/31/17.
Recent events (1)
- · Z (O) $0
1910.1200 E01
- Issued
- May 31, 2017
- Abate by
- Jul 18, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (Construction Reference: 1926.59) a) 315 West 94th street, New York, NY: Employees were using Laticrete 252 Silver which contains silica dust that can potentially cause cancer and were not provided with a hazard communication program, on or about 03/31/17.
Recent events (1)
- · Z (O) $0
1910.1200 G01
- Issued
- May 31, 2017
- Abate by
- Jul 18, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(g)(1): The employer did not have a material safety data sheet for each hazardous chemical which they used: (Construction Reference: 1926.59) a) 315 West 94th street, New York, NY: Employees were using Laticrete 252 Silver which contains silica dust that causes cancer and were not provided with a material safety data sheet, on or about 03/31/17.
Recent events (1)
- · Z (O) $0
1910.1200 H01
- Issued
- May 31, 2017
- Abate by
- Jul 18, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: (Construction Reference: 1926.59) a) 315 West 94th street, New York, NY: Employees were using Laticrete 252 Silver which contains silica dust that causes cancer and were not provided with training on the chemicals, on or about 03/31/17.
Recent events (1)
- · Z (O) $0
More inspections at 315 94TH LLC
View 315 94TH LLC's full OSHA safety record →
More inspections in this industry (NAICS 236115)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 342231966.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.