OAK PARK, IL ·
OSHA Inspection: MANUEL GUAMAN DBA MANUEL GUAMAN
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MANUEL GUAMAN DBA MANUEL GUAMAN in 900 HAYES AVE., OAK PARK, IL 60302 (NAICS 238160). OSHA activity number 342249216.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MANUEL GUAMAN DBA MANUEL GUAMAN
- Site address
- 900 HAYES AVE.
- City
- OAK PARK
- State
- IL
- ZIP
- 60302
- Mailing
- 5055 W. DEMING PL BASEMENT, CHICAGO, IL 60639
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 4
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1903.19 C01
- Issued
- Sep 1, 2017
- Abate by
- Oct 5, 2017
- Penalty
- Initial $305 · Current $305
General-duty citation text
29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated: Manuel Guaman dba Manuel Guaman, failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected: Citation Number Item Number Abatement Date 01 01 06/28/2017 01 02 06/28/2017 01 03 06/22/2017 01 04 06/28/2017 In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
- · Z (O) $305
1926.150 C01 VI
- Issued
- Jun 16, 2017
- Abate by
- Jun 28, 2017
- Penalty
- Initial $2,716 · Current $2,716
General-duty citation text
29 CFR 1926.150(c)(1)(vi): A fire extinguisher, rated not less than 10B, was not provided within 50 feet of wherever more than 5 gallons of flammable or combustible liquids or 5 pounds of flammable gas were being used on the jobsite: a) On April 13, 2017, a fire extinguisher was not provided where employees were using a 20 pound propane tank to fuel a roofing torch. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
- · Z (S) $2716
1926.416 A01
- Issued
- Jun 16, 2017
- Abate by
- Jun 28, 2017
- Penalty
- Initial $3,803 · Current $3,803
General-duty citation text
29 CFR 1926.416(a)(1): Employees were permitted to work in proximity to electric power circuits and were not protected against electric shock by de-energizing and grounding the circuits or effectively guarding the circuits by insulation or other means: a) On or about April 13, 2017, employees were exposed to electrical shock while working in close proximity to a 120/240 volt overhead power line. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
- · Z (S) $3803
1926.501 B13
- Issued
- Jun 16, 2017
- Abate by
- Jun 22, 2017
- Penalty
- Initial $3,803 · Current $3,803
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): a) On April 13, 2017, employees performing roofing work were exposed to fall hazards of up to approximately 20.7 feet. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
- · Z (S) $3803
1926.1053 B01
- Issued
- Jun 16, 2017
- Abate by
- Jun 28, 2017
- Penalty
- Initial $2,716 · Current $2,716
General-duty citation text
29 CFR 1926.1053(b)(1): Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access: a) On April 13, 2017, employees were using an extension ladder which did not extend 3 feet above the upper landing being accessed. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
- · Z (S) $2716
More inspections in this industry (NAICS 238160)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 342249216.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.