Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,124Inspections Most recent open 2026-08-25 Last loaded 2026-08-28

OSHA Inspection: ADHESIVES RESEARCH, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of ADHESIVES RESEARCH, INC. in 400 SEAKS RUN ROAD, GLEN ROCK, PA 17327 (NAICS 325520). OSHA activity number 342282498.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Adhesives Research, INC. for free Get an email when a new federal OSHA severe-injury report for Adhesives Research, INC. is published. One employer, no account, unsubscribe in one click.
Site address
400 SEAKS RUN ROAD
City
GLEN ROCK
State
PA
ZIP
17327
Mailing
400 SEAKS RUN ROAD ATTN: DONNA PALEY, GLEN ROCK, PA 17327
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
325520
Employees
243
Ownership type
Private (A)

3 citations on file for this inspection.

1910.147 D04 I

Serious Gravity 5 2 instances 2 exposed
Issued
Jun 21, 2017
Abate by
Jul 26, 2017
Penalty
Initial $7,696 · Current $5,772 Reduced
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees:  (a)  400 Seaks Run Road, Glen Rock Pennsylvania, 50 gallon reactor - The employer did not ensure that when employees were troubleshooting, testing or repositioning a machine that a device was affixed to each energy source, on or about April 25, 2017.  (b)  400 Seaks Run Road, Glen Rock Pennsylvania, 50 gallon reactor - The employer did not ensure that when employees  preformed maintenance on a machine that a device was affixed to each energy source, on or about April 27, 2017.    Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • · I (S) $5772
  • · Z (S) $7696

1910.147 F01

Serious Gravity 5 1 instance 1 exposed
Issued
Jun 21, 2017
Abate by
Jul 26, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.147(f)(1): When lockout or tagout devices temporarily were removed from the energy isolating device and the machine or equipment was energized to test or position the machine, equipment or component thereof, the sequence of actions described in 1910.147(f)(1(i) through 1910.147(f)(1(v)  were not followed:  (a)  400 Seaks Run Road, Glen Rock Pennsylvania, 50 gallon reactor - An employee repositioned the machine to clean grease from the gear.  The employer did not develop a procedure for the repositioning or testing of machines, equipment or components to be used in conjunction with the machine specific procedure, on or about April 25, 2017.    Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.147 C06 II

Serious Gravity 1 3 instances 3 exposed
Issued
Jun 21, 2017
Abate by
Jul 26, 2017
Penalty
Initial $4,617 · Current $3,463 Reduced
29 CFR 1910.147(c)(6)(ii): The employer did not certify that periodic inspections of the energy control procedures had been performed:  (a)  400 Seaks Run Road, Glen Rock Pennsylvania, 50 gallon reactor - Employees perform lock out tag out on reactors.  The employer did not ensure that periodic inspection were documented, on or about April 25, 2017.  Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
  • · I (S) $3462.75
  • · Z (S) $4617

View Adhesives Research, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 342282498.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.