CROSBY, TX ·
OSHA Inspection: ELECTRICAL FIELD SERVICES, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ELECTRICAL FIELD SERVICES, INC. in 14400 FM 2100, CROSBY, TX 77532 (NAICS 237110). OSHA activity number 342284270.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ELECTRICAL FIELD SERVICES, INC.
- Site address
- 14400 FM 2100
- City
- CROSBY
- State
- TX
- ZIP
- 77532
- Mailing
- 27911 FM 2100 RD., HUFFMAN, TX 77336
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 237110
- Employees
- 22
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.20 B04
- Issued
- Jun 13, 2017
- Abate by
- Jun 30, 2017
- Penalty
- Initial $5,070 · Current $3,042 Reduced
General-duty citation text
29 CFR 1926.20(b)(4): The employer failed to permit only those employees qualified by training or experience to operate equipment and machinery: On or about April 24, 2017, at or near 14400 FM 2100 in Crosby, TX, where employees were exposed to caught-in and struck-by hazards when working in an excavation to perform underground utility work using a trench shielding system without employees being qualified by training or experience with the equipment.
Recent events (2)
- · I (S) $3042
- · Z (S) $5070
1926.100 A
- Issued
- Jun 13, 2017
- Abate by
- Jun 23, 2017
- Penalty
- Initial $2,173 · Current $1,304 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: On or about April 24, 2017, at or near 1440 FM 2100 in Crosby, TX, where employees were exposed to struck-by hazards when working in an excavation performing sewer line tie-in work without protective helmets.
Recent events (2)
- · I (S) $1303.8
- · Z (S) $2173
1926.651 A
- Issued
- Jun 13, 2017
- Abate by
- Jun 23, 2017
- Penalty
- Initial $3,622 · Current $2,173 Reduced
General-duty citation text
29 CFR 1926.651(a): All surface encumbrances that were located so as to create a hazard to employees were not removed or supported, as necessary, to safeguard employees: On or about April 24, 2017, at or near 14400 FM 2100 where employees in an excavation were exposed to a caught-in and struck-by hazard when performing utility work without all surface encumbrances removed or supported.
Recent events (2)
- · I (S) $2173.2
- · Z (S) $3622
1926.652 A01
- Issued
- Jun 13, 2017
- Abate by
- Jun 19, 2017
- Penalty
- Initial $5,070 · Current $3,042 Reduced
General-duty citation text
29 CFR 1926.652(a)(1): Each employee in an excavation was not protected from cave-ins by an adequate protective system designed in accordance with 29 CFR 1926.652(c). On or about April 24, 2017, at or near 14400 FM 2100 where employees in an excavation approximately eight feet deep were exposed to a caught-in and struck-by hazard when performing utility work without an adequate protective system.
Recent events (2)
- · I (S) $3042
- · Z (S) $5070
1926.652 C02 III
- Issued
- Jun 13, 2017
- Abate by
- Jun 30, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.652(c)(2)(iii): Manufacturer's specifications, recommendations, and limitations, and manufacturer's approval to deviate from the specifications, recommendations, and limitations were not in written form at the jobsite during construction of the protective system. On or about April 24, 2017, at or near 14400 FM 2100 where employees performing utility work in an excavation using a rounded metal shielding system without the manufacturer's specifications, recommendations, and limitations in written form at the jobsite during construction of the protective system.
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections in this industry (NAICS 237110)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342284270.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.