OSCEOLA, WI —
OSHA Inspection: MARK-IT GRAPHICS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of MARK-IT GRAPHICS, INC. in 500 SIMMON DRIVE, OSCEOLA, WI 54020 (NAICS 541430). OSHA activity number 342313467.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MARK-IT GRAPHICS, INC.
- Site address
- 500 SIMMON DRIVE
- City
- OSCEOLA
- State
- WI
- ZIP
- 54020
- Mailing
- 500 SIMMON DRIVE, OSCEOLA, WI 54020
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 541430
- Employees
- 22
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.213 C01
- Issued
- Sep 11, 2017
- Abate by
- Oct 10, 2017
- Penalty
- Initial $5,070 · Current $3,550 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Each circular hand-fed ripsaw was not guarded by a hood which completely enclosed that portion of the saw above the table and that portion of the saw above the material being cut: (a) Cutting shop; The Rockwell table saw was not equipped with a hood guard when ripping and cross-cutting stock.
Recent events (2)
- — I (S) $3550
- — Z (S) $5070
1910.213 C02
- Issued
- Sep 11, 2017
- Abate by
- Oct 10, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Each hand-fed circular ripsaw was not furnished with a spreader to prevent material from squeezing the saw of being thrown back on the operator: Cutting shop; The Rockwell table saw was not equipped with a spreader when ripping wood stock.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Sep 11, 2017
- Abate by
- Oct 10, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: (a) Cutting shop; The Rockwell table saw was not equipped with kickback fingers when ripping and cross cutting stock.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.22 A01
- Issued
- Sep 11, 2017
- Abate by
- Sep 25, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(a)(1): The work area was not kept in a clean and orderly manner: (a) Near entrance of cutting shop; Two wood pallets and various boxes were placed in the walking/work area.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.134 H02 I
- Issued
- Sep 11, 2017
- Abate by
- Oct 10, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(h)(2)(i): Respirators were not stored to protect them from damage, contamination, dust, sunlight, extreme temperatures, excessive moisture, and damaging chemicals: (a) Cutting shop and wash area; Half mask respirators were not stored in a manner that would protect them from dust, alcohol and screen printing inks.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.305 G01 IV
- Issued
- Sep 11, 2017
- Abate by
- Oct 10, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv): Extension cords and/or power strips were being used in lieu of permanent building wiring: (a) Storage area; An extension cord utilized to power a laminator was used as permanent wiring.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.305 G02 III
- Issued
- Sep 11, 2017
- Abate by
- Oct 10, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws: (a) Screen prep area; A flexible cord connected to a work light had a damaged protective sheath that was exposing conductors.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Mark-It Graphics, INC.
View Mark-It Graphics, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 541430)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342313467.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.