OSHA Inspection: NAZAR DEMIR

Issued

Aug 10, 2017

Abate by

Aug 16, 2017

Penalty

Initial $2,173 · Current $0 Reduced

General-duty citation text

29 CFR 1910.25(b)(1): The employer did not ensure handrails, stair rail systems, and guardrail systems were provided in accordance with 1910.28:    Instance a. Upstairs- On or about May 25, 2017, the staircase in use to access the upstairs area was not provided with a handrail on either side of the staircase.     Instance b. White Staircase - On or about May 25, 2016, the staircase used for access to the upstairs area was not provided with a mid-rail on the open side of the staircase.

Issued

Aug 10, 2017

Abate by

Aug 16, 2017

Penalty

Initial $1,630 · Current $1,100 Reduced

General-duty citation text

29 CFR 1910.37(a)(3): Exit routes were not free and unobstructed in that materials or equipment were placed, either permanently or temporarily, within the exit route. The exit access went through a room that could be locked, to reach an exit or exit discharge:    Instance a. Shop - On or about May 25, 2017, the emergency exit was completely blocked off and not made available for fire or other emergency event.    Instance b. Shop Mr. Bokum Area - On or about May 25, 2017, the emergency exit was completely blocked by stored materials, trash and debris.

Issued

Aug 10, 2017

Abate by

Aug 16, 2017

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.157(c)(1): A portable fire extinguisher was blocked and not available for immediate use by employees:  a. Shop Mr. Bokum Area - On or about May 25, 2017, the fire extinguisher was blocked by stored items, trash and debris and not assessable.

Issued

Aug 10, 2017

Abate by

Aug 16, 2017

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.303(g)(1): Space about electric equipment. Sufficient access and working space shall be provided and maintained about all electric equipment to permit ready and safe operation and maintenance of such equipment:  a. Site - On or about May 25, 2017, the shop's main electrical panel was completely blocked by storage, trash and debris and not made easily accessible during maintenance or emergency procedures.

Issued

Aug 10, 2017

Abate by

Aug 16, 2017

Penalty

Initial $2,173 · Current $0 Reduced

General-duty citation text

29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:    a. Shop - On or about May 25, 2017, the employer failed to provide a medical evaluation to determine the employees ability to use the 3M respirator which was in use.

Issued

Aug 10, 2017

Abate by

Aug 16, 2017

Penalty

Initial $2,716 · Current $1,400 Reduced

General-duty citation text

29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support off-hand grinding work and/or work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one-eighth inch:     a. Shop - On or about May 15, 2017, the Delta 6-inch bench grinder was missing the work rest guard on the right-hand side of the grinding wheel.

Issued

Aug 10, 2017

Abate by

Aug 16, 2017

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.215(b)(3): Bench and/or floor stand grinding machinery had angular exposure of the grinding wheel periphery and sides for safety guard(s) which exceeded 125 degrees where the work required contact with the wheel below the horizontal plane of the spindle:  a. Shop - On or about May 25, 2017, the Delta 6-inch bench grinder's spindle end, nut and flange were not guarded.

Issued

Aug 10, 2017

Abate by

Aug 16, 2017

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one-fourth inch:  a. Shop - On or about May 15, 2017, the Delta 6-inch bench grinder was missing the tongue guard on the right-hand side of the grinding wheel.

Issued

Aug 10, 2017

Abate by

Aug 16, 2017

Penalty

Initial $1,630 · Current $0 Reduced

General-duty citation text

29 CFR 1910.1200(g)(8): The employer did not maintain copies of the required safety data sheets for each hazardous chemical in the workplace:    a. Shop - On or about May 25, 2017, the employer failed to provide MSDS information for each hazardous chemical utilized by the employees.

Issued

Aug 10, 2017

Abate by

Aug 16, 2017

Penalty

Initial $1,630 · Current $0 Reduced

General-duty citation text

29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed:     a. Site - On or about May 25, 2017, the electrical outlet box used to power the shop's restroom was missing its knockout and not fully enclosed.