Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,191,288Inspections Most recent open 2026-07-24 Last loaded 2026-07-29

OSHA Inspection: NATIONAL EXTERIOR, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of NATIONAL EXTERIOR, INC. in 4845 ALEXANDRA CT., ROLLING MEADOWS, IL 60008 (NAICS 238160). OSHA activity number 342380722.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch National Exterior, INC. — free Get an email when a new federal OSHA severe-injury report for National Exterior, INC. is published. One employer, no account, unsubscribe in one click.
Site address
4845 ALEXANDRA CT.
City
ROLLING MEADOWS
State
IL
ZIP
60008
Mailing
109 PAULINE AVE., BUFFALO GROVE, IL 60089
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
6
Ownership type
A

5 citations on file for this inspection.

1903.19 C01

Other-than-serious 1 instance 1 exposed
Issued
Aug 2, 2017
Abate by
Sep 5, 2017
Penalty
Initial $305 · Current $305
29 CFR 1903.19(c)(1):  The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:     National Exterior, Inc., failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:     Citation Number                       Item Number                            Abatement Date  01                                            01                                            06/14/2017  01                                            02a                                           06/14/2017  01                                            02b                                           06/14/2017  01                                            03                                             06/14/2017    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (O) $305

1926.451 E01

Serious Gravity 10 1 instance 1 exposed
Issued
Jun 8, 2017
Abate by
Jun 14, 2017
Penalty
Initial $3,803 · Current $3,803
29 CFR 1926.451(e)(1): Safe access was not provided to scaffold platforms when the platforms were more than 2 feet (0.6 m) above or below a point of access:        a) On or about June 7, 2017, employees were not provided with safe access to scaffolding from which they were required to work at an elevation of approximately 18 feet.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (S) $3803

1926.451 G01

Serious Gravity 10 1 instance 1 exposed
Issued
Jun 8, 2017
Abate by
Jun 14, 2017
Penalty
Initial $3,803 · Current $3,803
29 CFR 1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section:    a) On or about June 7, 2017, employees were exposed to the hazard of falling approximately 18 feet while working from scaffolding without the benefit of fall protection.   In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (S) $3803

1926.501 B13

Serious Gravity 10 3 instances 3 exposed
Issued
Jun 8, 2017
Abate by
Jun 14, 2017
Penalty
Initial $0 · Current $0
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501(b):              a) Front of Building - On or about June 7, 2017, employees were exposed to the hazard of falling while working without fall protection from a pitched roof surface having a ground to eave height of approximately 10 feet.    b) Rear and Side of Building - On or about June 7, 2017, employees were exposed to the hazard of falling while working without fall protection from a pitched roof surface having a ground to eave height of approximately 18 feet.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (1)
  • — Z (S) $0

1926.1053 B16

Serious Gravity 5 1 instance 1 exposed
Issued
Jun 8, 2017
Abate by
Jun 14, 2017
Penalty
Initial $2,716 · Current $2,716
29 CFR 1926.1053(b)(16): Portable ladders with structural defects, such as, but not limited to, broken or missing rungs, cleats, or steps, broken or split rails, corroded components, or other faulty or defective components, were not either immediately marked in a manner that readily identifies them as defective, or tagged with "Do Not Use" or similar language, and were not withdrawn from service until repaired:    a) On or about June 7, 2017, a portable extension ladder provided for use had bent rails and rungs.      In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (S) $2716

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342380722.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.