SAN ANTONIO, TX ·
OSHA Inspection: RELIANCE TRUCK & EQUIPMENT LTD
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of RELIANCE TRUCK & EQUIPMENT LTD in 7200 S WW WHITE RD, SAN ANTONIO, TX 78222 (NAICS 332313). OSHA activity number 342382595.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RELIANCE TRUCK & EQUIPMENT LTD
- Site address
- 7200 S WW WHITE RD
- City
- SAN ANTONIO
- State
- TX
- ZIP
- 78222
- Mailing
- 7200 S WW WHITE RD, SAN ANTONIO, TX 78222
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332313
- Employees
- 6
- Ownership type
- Private (A)
Citations
6 citations on file for this inspection.
1910.178 P01
- Issued
- Nov 15, 2017
- Penalty
- Initial $2,173 · Current $978 Reduced
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition: On or about June 8, 2017, and at times prior thereto, employees were exposed to ejection hazards while operating a Hyster forklift that had the manufacturer's installed seat belt removed.
Recent events (2)
- · I (S) $978
- · Z (S) $2173
1910.212 A01
- Issued
- Nov 15, 2017
- Penalty
- Initial $2,173 · Current $978 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Shop Floor: On or about June 8, 2017, and at times prior thereto, employees were exposed to struck-by hazards while using a Northern Industrial Drill Press without a chuck guard installed. b) Outside: On or about June 8, 2017, and at times prior thereto, employees were exposed to caught-in hazards while using an air compressor without the belt guard installed.
Recent events (2)
- · I (S) $978
- · Z (S) $2173
1910.215 B09
- Issued
- Nov 15, 2017
- Penalty
- Initial $1,630 · Current $734 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: On or about June 8, 2017, and at times prior thereto, employees were exposed to struck-by hazards while using a Ryobi 3600 RPM bench grinder when the tongue guard was not adjusted to one fourth inch or less.
Recent events (2)
- · I (S) $734
- · Z (S) $1630
1910.305 B01 II
- Issued
- Nov 15, 2017
- Penalty
- Initial $1,630 · Current $734 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: Maintenance area: On or about June 8, 2017, and at times prior thereto, employees were exposed to electrical hazards, while accessing an electrical cabinet with a missing deadfront cover exposing live parts.
Recent events (2)
- · I (S) $734
- · Z (S) $1630
1910.334 A02 II
- Issued
- Nov 15, 2017
- Penalty
- Initial $1,630 · Current $734 Reduced
General-duty citation text
29 CFR 1910.334(a)(2)(ii): There was a defect or evidence of damage that could have exposed an employee to injury and the defective or damaged item was not removed from service and an employee was using it before repairs and tests necessary to render the equipment safe were made: Maintenance area: On or about June 8, 2017, and at times prior thereto, employees were exposed to electrical hazards, while using an extension cord with damaged areas to its outer insulation.
Recent events (2)
- · I (S) $734
- · Z (S) $1630
1910.157 C01
- Issued
- Nov 15, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries: Maintenance Shop: On or about June 8, 2017, and at times prior thereto, employees were exposed to fire hazards, while the fire extinguisher was blocked from immediate access by a parts washer.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections in this industry (NAICS 332313)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 342382595.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.