OSHA Inspection: N&E REAL ESTATE HOLDINGS, LLC

Issued

Jun 20, 2017

Abate by

Jul 17, 2017

Penalty

Initial $2,463 · Current $1,300 Reduced

General-duty citation text

29 CFR 1910.212(a)(1):  One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    1) On June 7, 2017, and at prior times, guarding was not provided to protect employees from the rotating shaft that twists wires on the wire machine.

Issued

Jun 20, 2017

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):  1) On June 7, 2017, and at prior times, the points of operation on the Edward Segal brand eyelet machines were not guarded.

Issued

Jun 20, 2017

Abate by

Jul 17, 2017

Penalty

Initial $2,463 · Current $1,300 Reduced

General-duty citation text

29 CFR 1910.219(b)(1): Flywheel(s) with parts seven feet or less above floor(s) or platform(s) were not guarded in accordance with the requirements specified in 29 CFR 1910.219(b)(1)(i) through (b)(1)(iv)(a):    1) On June 7, 2017, and at prior times, a flywheel on the punch machine was not guarded.

Issued

Jun 20, 2017

Abate by

Jul 17, 2017

Penalty

Initial $2,463 · Current $1,100 Reduced

General-duty citation text

29 CFR 1910.219(d)(1):  29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):     1) On June 7, 2017, and at prior times, pulleys were not guarded on the following equipment:       a) the mechanical eyelet machine;       b) the wire machine.

Issued

Jun 20, 2017

Abate by

Jul 17, 2017

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and (o):  1) On June 7, 2017, and at prior times, a horizontal belt on the wire machine was not enclosed by machine guards.

Issued

Jun 20, 2017

Abate by

Jul 17, 2017

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.219(e)(3): 29 CFR 1910.219(e)(3): Vertical and inclined belts were not enclosed by a guard conforming to the standards in paragraphs specified in 29 CFR 1910.219(m) and (o):  1) On June 7, 2017, and at prior times, a vertical belt on the mechanical eyelet machine was not enclosed by a machine guard.