Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,549Inspections Most recent open 2026-08-27 Last loaded 2026-08-31

OSHA Inspection: RANDALL BEARINGS INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of RANDALL BEARINGS INC. in 1046 GREENLAWN AVE P.O. BOX 1258, LIMA, OH 45804 (NAICS 332999). OSHA activity number 342393923.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Randall Bearings INC. for free Get an email when a new federal OSHA severe-injury report for Randall Bearings INC. is published. One employer, no account, unsubscribe in one click.
Site address
1046 GREENLAWN AVE P.O. BOX 1258
City
LIMA
State
OH
ZIP
45804
Mailing
1046 GREENLAWN AVE, LIMA, OH 45804
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
Union (A)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332999
Employees
81
Ownership type
Private (A)

4 citations on file for this inspection.

1910.1025 H01

Serious Gravity 10 4 instances 30 exposed
Issued
Nov 30, 2017
Abate by
Feb 15, 2018
Penalty
Initial $11,408 · Current $5,800 Reduced

Hazardous substances 1591

29 CFR 1910.1025(h)(1): All surfaces were not maintained as free as practicable of accumulations of lead:     Instance A      Randall Bearing, Inc. located in Lima, Ohio; On or about June 13, 2017 the employer did not ensure all surfaces were maintained as free as practicable of accumulations of lead in that lead contamination was found at 23.82 mg/100cm2 on the top of the microwave located in the break room. Employees were exposed to hazards associated with lead through ingestion.       Instance B      Randall Bearing, Inc. located in Lima, Ohio; On or about June 13, 2017 the employer did not ensure all surfaces were maintained as free as practicable of accumulations of lead in that lead contamination was found at 39.83 mg/100cm2 on buttons of a food vending machine located in the break room. Employees were exposed to hazards associated with lead through ingestion.       Instance C      Randall Bearing, Inc. located in Lima, Ohio; On or about June 13, 2017 the employer did not ensure all surfaces were maintained as free as practicable of accumulations of lead in that lead contamination was found at 4.24 mg/100cm2 on the top of a lunch table located in the break room. Employees were exposed to hazards associated with lead through ingestion.       Instance D      Randall Bearing, Inc. located in Lima, Ohio; On or about June 13, 2017 the employer did not ensure all surfaces were maintained as free as practicable of accumulations of lead in that lead contamination was found at 18.43 mg/100cm2 on the top of the quality managers desk located in the front office. Employees were exposed to hazards associated with lead through ingestion.
Recent events (2)
  • · I (S) $5800
  • · Z (S) $11408

1910.1025 J01 I

Deleted Serious Gravity 10 1 instance 1 exposed
Issued
Nov 30, 2017
Abate by
Dec 13, 2017
Penalty
Initial $11,408 · Current $0 Reduced

Hazardous substances 1591

29 CFR 1910.1025(j)(1)(i):  The employer did not institute a medical surveillance program for all employees who are or may be exposed at or above the action level for more than 30 days per year:  a) Randall Bearing, Inc. located in Lima, Ohio; On or about June 13, 2017 the employer did not implement a medical surveillance program for employees who are or may be exposed to lead at or above the action level, 30 mg/m3, for more than 30 days per year. An employee operating the Okuma Lathe, 2503-02, was exposed to lead at an eight hour time weighted average of 45 mg/m3 which exceeded the action limit of 30 mg/m3 by 150%. Employees were exposed to hazards associated with the inhalation of lead.
Recent events (2)
  • · I (S) $0
  • · Z (S) $11408

1910.1025 L01 I

Serious Gravity 10 1 instance 30 exposed
Issued
Nov 30, 2017
Abate by
Jan 15, 2018
Penalty
Initial $11,408 · Current $5,800 Reduced

Hazardous substances 1591

29 CFR 1910.1025(l)(1)(i): Employee(s) working in an area where there is potential exposure to airborne lead at any level were not informed of the content of Appendices A and B of 29 CFR 1910.1025:    a) Randall Bearing, Inc. located in Lima, Ohio; On or about June 13, 2017 the employer did not inform or provide employees with the content of OSHAs 1910.1025 standard and its appendices, A & B, where there is potential exposure to airborne lead at any level. Employees operating mills, lathes, and grinders were exposed to hazards associated with lead.
Recent events (2)
  • · I (S) $5800
  • · Z (S) $11408

1910.1025 L01 II

Deleted Serious Gravity 10 1 instance 1 exposed
Issued
Nov 30, 2017
Abate by
Dec 13, 2017
Penalty
Initial $0 · Current $0

Hazardous substances 1591

29 CFR 1910.1025(l)(1)(ii): The employer did not train each employee who is subject to exposure to lead at or above the action level, or for whom the possibility of skin or eye irritation exists, in accordance with the requirements of 29 CFR 1910.1025:  a) Randall Bearing, Inc. located in Lima, Ohio; On or about June 13, 2017 the employer did not conduct training with each employee who is subject to exposure to lead above the action limit. An employee operating the Okuma LU35-M was exposed to hazards associated with lead exposure and was not informed of the following:   a)      OSHAs 1910.1025 lead standard and its appendices. b)      The specific nature of the operations which could result in exposure to leave above the action level. c)      The purpose and a description of the medical surveillance program, and the medical removal protection program including information concerning the adverse health effects associated with excessive exposure to lead (with particular attention to the adverse reproductive effects on both males and females).  d)      Engineering controls and work practices associated with job assignments. e)      Contents of any compliance plan in effect. f)       Instructions to employees that chelating agents should not routinely be used to remove lead from their bodies and should not be used at all except under the direction of a licensed physician.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

View Randall Bearings INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 342393923.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.