GLASGOW, MT —
OSHA Inspection: NEWTON MOTORS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of NEWTON MOTORS, INC. in 440 HWY 2 W, GLASGOW, MT 59230 (NAICS 441110). OSHA activity number 342409968.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NEWTON MOTORS, INC.
- Site address
- 440 HWY 2 W
- City
- GLASGOW
- State
- MT
- ZIP
- 59230
- Mailing
- P.O. BOX 391, GLASGOW, MT 59230
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 441110
- Employees
- 12
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.28 B01 I
- Issued
- Aug 30, 2017
- Abate by
- Sep 26, 2017
- Penalty
- Initial $2,463 · Current $1,478 Reduced
General-duty citation text
29 CFR 1910.28(b)(1)(i): (1) Unprotected sides and edges. (i) Except as provided elsewhere in this section, the employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling: a) Service Area: On June 19, 2017 and at times prior, employees were exposed to fall hazards of approximately 73 inches while accessing specialty tools from a stairway missing a intermediate rail with 9 risers and 9 runs.
Recent events (2)
- — I (S) $1477.8
- — Z (S) $2463
1910.212 A01
- Issued
- Aug 30, 2017
- Abate by
- Sep 26, 2017
- Penalty
- Initial $2,463 · Current $1,478 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Service Area: June 19, 2017 and at times prior employees were exposed to caught-in hazards while using an unguarded Accu-Turn Combination Brake Lathe Model 8922 115 Volt 15 AMP 50/60 Hz AC Serial No. UN-s08741-DN.
Recent events (2)
- — I (S) $1477.8
- — Z (S) $2463
1910.219 D01
- Issued
- Aug 30, 2017
- Abate by
- Sep 26, 2017
- Penalty
- Initial $2,463 · Current $1,478 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) Accu-Turn Brake Lathe: On June 19, 2017 and at times prior, employees were exposed to caught-in hazards while walking and working around an unguarded drive pulley. b) Accu-Turn Brake Lathe: On June 19, 2017 and at times prior, employees were exposed to caught-in hazards while walking and working around an unguarded chuck pulley.
Recent events (2)
- — I (S) $1477.8
- — Z (S) $2463
1910.219 E01 I
- Issued
- Aug 30, 2017
- Abate by
- Sep 26, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and (o): a) Accu-Turn Brake Lathe: On June 19, 2017 and at times prior employees were exposed to caught-in hazards while walking and working in and around an unguarded belt.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Newton Motors, INC.
View Newton Motors, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 441110)
More inspections in MT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342409968.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.